Two weeks ago I wrote and published my ‘Goodbye’ message to our EU-funded Learning Layers (LL) project. Obviously, I was too hasty – my work in the project was not over although my contract had come to an end. And apparently my colleagues guessed this because they didn’t react as if it were really the end. During the two last weeks I have been heavily involved in finalising the contributions of the LL Construction Pilot to the final deliverable. Now – as far as I am concerned – that work is done. I pass the ball and leave the field.

In the meantime I pulled the original ‘Goodbye’ blog out. Now it is time to publish it again. Here it comes:

The Goodbye Message

During the last four years most of my blogs have been related with our EU-funded Learning Layers (LL) project (2012-2016). I have used my blog to document the ongoing work, present our contributions, report on achievements and reflect on lessons learned. Now this period is over. This week  my contract with the project came to an end. During the last few weeks I have been writing our contributions to the final deliverable of the project. There are still some tasks to be completed but by and large the work is done. This is also reflected in my latest blogs on wrapping up our experience.

Now it is time to welcome the follow-up phase. However, in my case there is not a seamless transition from this project to immediate successor project. Instead, I have to go through an interim period during which some solutions have been found and others are being sought. At the same time I have to cope with health issues that take their time as well.

On the whole I try to put on top in my mind the good experiences with the Learning Layers project and the Construction pilot. We have achieved a lot and learned a lot – and this is not all wrapped up in the final deliverable or in my 170 blogs during these years. There is a wealth to look back and an experience to build upon. I hope that the opportunities are round the corner (if not quite at hands).

I now thank the colleagues with whom I have worked in all participating countries and at all phases of the project. I hope you all the best. And I hope that I still meet some of you in the final review and in the follow-up activities. If I were asked to give an honest answer, how I felt about the project, I would ask De Dannan to give a musical answer for me:

DeDannan – Arrival of the Queen of Sheba (In Galway Bay)

And if I were asked to give an honest answer, how I feel about stepping out of the project, I would also ask De Dannan and the visiting vocalists Eleanor Shanley and Ronnie Drew to give it for me:

Restless Farewell / The Parting Glass – Eleanor Shanley & Ronnie Drew

So, with this post I close my last Logbook on Learning Layers blogs on Working & Learning.  Now it is time to enter a new phase of blogging after this project experience. I will continue blogging – working and learning – but in a new era.

More blogs to come …

During the four last years I have been blogging intensively on our ongoing EU-funded Learning Layers (LL) project. Now the time has come to close that chapter. I have three reasons to make that statement:

1. The project itself is at its final stage and our field activities are being closed.
2. My contract with the project has already come to an end. At the moment I have not been yet been engaged in the follow-up activities that are still in the process of getting shaped.
3. Due to health issues I am no longer available for field activities in the same way as before.

So, with all the good time passed with the LL project and with all due optimism vis-à-vis the open questions, I am well advised to to take a look back at my blogs and see, what all comes up there.

1.  Blogs of the years 2012 and 2013 – Working ourselves in into the project

Now, looking back, the blogs of the first year reflect a period when we all (research partners, technical partners and application partners) were working ourselves in into the project and finding our ways to work together. I have reported intensively of the initial field visits, of the Application Partner Days and of the work around the Helsinki Design Conference 2013. Also, I have reported of several rounds of co-design workshops and of the first Multimedia Training workshops. At that point we still tried to work with a massive digitisation agenda with the Bau-ABC “White Folder” and sought to narrow it down for rapid prototyping. As our main achievements I highlighted the good collaborative spirit in the co-design workshops and the readiness for shared learning in the Multimedia training workshops. Later on I started to use the concept ‘research & development (R&D) dialogue’ to emphasise this as something very valuable that we had established together.

The logbook of my blogs of these years is available on ResearchGate, see:

PK-Logbook of Working & Learning blogs on Learning Layers 2013

2. Blogs of the year 2014 – Taking the course to develop the Learning Toolbox

The second year was started with a planning exercise – to sketch ‘development projects’ as mode of operation that gives us more flexibility across the work packages and initial design teams. For the construction pilot this was an important signal because it helped us to highlight the development of the Learning Toolbox (LTB) as our new working perspective. In addition to this important shift of emphasis I have reported intensively of the preparation and implementation of the Theory Camp (March 2014) and our follow-up with our contributions to the European Conference on Educational Research (ECER 2014, September 2014). However, the main thrust in that year was clearly in our user engagement with our colleagues in Bau-ABC. We had a major promotion campaign on the idea of LTB during the annual Brunnenbauertage conference. We had an intensive “Demo Camp” promotion session with Bau-ABC trainers and apprentices alongside our consortium meeting in Bau-ABC. We had other outreach activities (the NordBau trade fair and a workshop with companies). Finally, the highlight of the year was the package of videos that we edited with Bau-ABC trainers to support the development of the LTB.

The logbook of my blogs of this year is available on ResearchGate, see:

PK-Logbook of ” Working & Learning ” blogs on Learning Layers 2014

3. Blogs of the year 2015 – The rocky road to Theme Room training and piloting with LTB

The first half of the year 2015 was characterised by hard work with software development and with preparing funding bids for follow-up projects. Neither of these topics was heavily present on the blogs. Therefore, there was quite a lot of reporting on interim events, on the Espoo Design conference and on several hot issues from Finland (the AchSo pilot in Finnish construction sector, the Sustainability Commitments, knowledge sharing on Activity Theory, joint event with Finnish promoters of apprentice training). In April we experienced the opening of the Learning Exhibition “nachhaltig.bauen.erleben” of our application partners in Verden. In May we visited the annual Training Day of Bau-ABC trainers, still with a simulation version of LTB. The turning point was the consortium meeting in Tallinn where we had our first discussion on the Theme Room training concept and a release of LTB with which we could proceed to preliminary testing. So, after the summer break we were already engaging Bau-ABC trainers in testing and in the autumn months we implemented the Theme Room training campaign – both topics well covered with blogs.

The logbook of my blogs of this year is available on ResearchGate, see:

PK-Logbook of “Working & Learning” blogs on Learning Layers 2015

4. Blogs of the year 2016 – With seven-league boots in the final run

The clear highlight of the final project year has been the introduction of the Learning Toolbox (LTB) into apprentice training in Bau-ABC – and later in the year to construction site management in Verden. The progress in Bau-ABC has been covered with blogs on preparatory meetings in February, on the Kick-off event in March and on later working visits in April and May. The exemplary openings in the pioneering trades (well-builders; carpenters and bricklayers) and the transfer to neighbouring trades have been observed carefully. Also tests in other fields of application (Training in Health and Safety; Support for trans-national mobility) were introduced. And in-between we had fairly successful testing visit with AchSo and SOAR introduced by colleagues from Aalto. And after the summer break we were happy to find out during the evaluative field visits (together with Markus Manhart from UIBK and Jaanika Hirv from TLU) that the Bau-ABC trainers and apprentices had taken LTB as their own tools to use it with their accents as support for training and learning. This then paved the way for the high season of preparing the final deliverables (that I have discussed in my latest blogs).

The logbook of my blogs of this year is available on ResearchGate, see:

PK-Logbook of “Working & Learning” blogs on Learning Layers 2016

– – –

I think this is enough of my journey with the LL project as it has been portrayed on my blogs. Of course, the blogs are episodic snapshots and do not necessarily grasp the bigger picture (although I have tried to cover this level of analysis as well). Some of the blogs have been combined and reworked into articles on the LL project website and latterly into the “Learning Toolbox Chronicle”. As the running number of the blog entries is right now 176 (if I have not counted wrong), it is perhaps easier to get an overview from those chronicles than by walking through the heavier logbooks. But both types of collections are there. With this statement I close this chapter and take the next step  to move on.

More blogs to come …

Quite some time my blogs have focused on producing contributions to the final deliverable of our (still) ongoing EU-funded Learning Layers (LL) project. Now these contributions are taking shape and are being edited as part of a group picture of the results of the whole project. This gives me rise to work with the question: How can we make sure that we take full benefit of the legacy of our project? One part of the answer is to edit a good final deliverable (that will happen). Another part is to make sure that the working documents and reflection documents produced at different stages of the project are not getting lost but are being ‘harvested’ as well. With both aspects in my mind I have recently worked to build up the Learning Layers presence on ResearchGate. I have created two project spaces – one for “Learning Layers Construction Pilot” and the other for “Learning Layers Theory Camp follow-up”.

RG project space for “Learning Layers Construction Pilot” – what for?

The decision to set up a project space for Learning Layers – and in particular for the Construction Pilot – grew out of the need to create commentary spaces that point to the Learning Layers materials that I am uploading to ResearchGate anyway. Firstly I used that space as means to provide some samples of information – news updates on series of blogs and lists of articles – as ‘starters’ to get familiarised with our project. Now that our final contributions are taking shape, this project space provides an opportunity for ‘sneak preview’. Moreover, since some of the draft documents will be edited shorter, I have uploaded the original draft versions (ODV) in full length.

As of today we find the following final documents of the Construction Pilot as ODVs on ResearchGate:

• Use of Learning Toolbox (LTB) by Bau-ABC Trainers and Apprentices (Impact Card C-11, Construction pilot, Germany)
• Multimedia Training for and with Bau-ABC trainers (Impact Card C-12, Construction pilot, Germany)
• Learning Toolbox (LTB) as Support for Action-Oriented Learning in the Apprentice Training of Bau-ABC – Instances of Change (Learning Scenario S-09, Construction Pilot, Germany)
• Learning Toolbox as Support for Organisational Learning and Cooperation at a Construction Site in Verden – Instances of change (Learning Scenario S-02, Construction Pilot, Germany) Motivation and Theoretical Contribution
• Accompanying Research and Participative Design in the Pilot activities in the Training Centre Bau-ABC (Methodology Document M-10, Construction Pilot, Germany)
• Training interventions as capacity-building for digital transformation in the Training Centre Bau-ABC (Methodology Document M-11, Construction pilot, Germany)

As the project is coming to an end, this space will also provide insights into follow-up activities.

RG project space for “Learning Layers Theory Camp follow-up” – what for?

The second project space was created quite recently to ‘harvest’ the contributions to the Learning Layers Theory Camp (March 2014) that were prepared by the ITB team. Whilst there was some kind of follow-up at the consortium level with some meta-themes, the contributions provided by us were not discussed widely. Yet, we had put some effort to cover some theoretical, methodological and research-strategic issues. Now, in the final analyses and in the the transition to follow-up activities, it is useful to revisit some of these themes and our theoretical contributions from the earlier phase of the project. Currently we have following main documents allocated to this project space:

• WP1/ Work Process Knowledge: Introduction to the reviewing of the legacy of the EU-funded Work Process Knowledge network (FP4 – TSER)
• WP2/ Work Process Knowledge: Revisiting the Theme ‘Work Process Knowledge’ and its implications for vocational education and training – The position the WPK network
• Commentary 1 on theoretical foundations of the Work Process Knowledge network (based on the synthesis article of M. Fischer and N. Boreham 2004) – 2014
• Commentary 2 on empirical studies of Work Process Knowledge network – based on the interim synthesis article of M. Fischer and N. Boreham
• WP Accompanying Research: Reviewing the role of Accompanying Research, Interactive Research and Action research as support for participative design processes
• Commentary note 1: Activity Theory – Foundations, conceptual evolution, implications for a developmental research strategy – 2015
• Commentary note 2: Activity Theory – Intervention research cases, Change Laboratory processes and research findings – 2015

As the project is coming to an end we will also rework with these materials as well when we are preparing (secondary) analyses of the empirical findings and reflection papers on our fieldwork.

– – –

I think this is enough of the Learning Layers presence on ResearchGate – as far as the project spaces “Construction Pilot” and the “Theory Camp follow-up” are concerned. Both will have a life beyond the funding period of the current Learning Layers project.

More blogs to come …

In my latest blog I started yet another series of posts on our contributions to the final deliverable of our EU-funded Learning Layers (LL) project. I might be repeating myself but it is worth reflecting, what kind of learning experience we have made with our partners in the Learning Layers Construction pilot. At the end of the journey  we are able to highlight what all has contributed to the innovation processes we have been working with. In my previous post I discussed this with focus on the role of accompanying research in a process of multi-channeled research & development (R&D) dialogue. In this post I focus on the role of training interventions in our project experience.

Here I have been working with a similar question (as in my previous blog), how to present our training interventions as a contribution to the innovation process (that we have gone through together with our application partners):

• Can we claim that our training interventions have been based on a pre-designed ‘training method’ that guided the shared learning into good results? Can we present this ‘training method’ as the legacy of our project?
• Or – shall we interpret our training and learning experiences as a more complex process innovation in which we played a part – an active part, but yet only a part of the common story? Shall we present the training interventions as a thread in the story of the R&D dialogue – and as part of the same legacy?

This time I present the answers that we can give by using extracts from our document “Training interventions as capacity-building for digital transformation – Construction pilot”. And here again, I hope that the extracts from the longer report text give a clear idea, what our answer is and why.

Starting point of our training interventions: Need for shared learning to bring co-design work forward

“This document provides insights into the role of training interventions as support for co-design processes and related research & development (R&D) dialogue in the construction pilot. The following developments are highlighted:

• The training interventions were introduced as a process innovation alongside and within the co-design (not as a finalised ‘method’ to be implemented).
• The early Multimedia training activities were introduced as a separate initiative, but gradually they became an important support for refocusing the co-design process.
• The Theme Room training campaign became a ‘whole organisation initiative’ and paved the way to use the Learning Toolbox (LTB) in the apprentice training projects of Bau-ABC in different trades.
• The Theme Room concept was proposed for a longer training campaign with more features. The documentation of the concept and use of materials (in Moodle) makes it possible to customise the approach (including the use of the LTB as a specific theme for training and tool for learning).

In the light of the above the training interventions were introduced firstly as ad hoc measures to support the co-design process. Firstly, they were planned as awareness-raising events with practical tasks to consolidate learning gains. Then, after a short interim period the Bau-ABC trainers prepared a new initiative  that aimed to raise the user-competences of the entire training staff to a new level. Looking back, this process can be reconstructed as two phases of training interventions with an interim phase, during which the initiative shifted from the research and technology partners to the application partners.”

Reflections on training interventions: Process innovations alongside co-design and involving all parties

Looking back, it is apparent that the training interventions were not launched on the basis of ready-made method taken from a textbook. Instead, they were introduced as a process innovation that responded to certain challenges in the co-design work. The dynamics of the process innovation can be summarised in the following way:

Firstly, the Multimedia training activities were introduced as a separate initiative – rather loosely linked to the co-design process. Then, thanks to the learning progress of participants, the training results (the start of the blogs, the work with videos) became an important support for the refocused design work. With the Bau-ABC trainers’ own videos on opportunities and challenges for learning they could give impulses for the shaping of the Learning Toolbox.

Secondly, after the early Multimedia training the Bau-ABC trainers wanted to introduce a lightweight follow-up activity with their weekly sessions for informal exchanges. However, they came to the conclusion that such activities do not support their learning sufficiently. Therefore, they proposed the Theme Room training concept and its implementation as a ‘whole organisation initiative’ in Bau-ABC. In this way the trainers’ informal learning was to be strengthened in collaboration with the research partners. This provided a new opportunity to bring the ongoing phase of design activities closer to the trainers’ learning processes.

Thirdly, the Theme Room concept was proposed as flexible training model for open learning processes that were using given learning spaces (‘rooms’) for going through work-oriented learning processes that were shaped as themes. The pace was to be kept flexible and the ‘booking of rooms’ in force until the participants had completed their tasks. Then the rooms could be re-furnished. In this sense the model was designed for continuing and customised learning processes. In the first implementation it was neither possible to introduce the Learning Toolbox nor to make any use of it. However, after the successful pilot testing in Bau-ABC it is possible to make the use of Learning Toolbox a central element of such training and to make using its functionality in a wide range of learning tasks.

– – –

I think this is enough of the training interventions and their role in the whole process. We may not have drawn all the conclusions from this rich experience. And we may not have thought through, how to build upon this experience in the follow-up activities. However, we have made enough experiences to see, how the training interventions nurtured the co-design work and how the Theme Room concept can be enriched with the use of Learning Toolbox. This is clearly ‘social shaping’ (Gestaltung) in practice – both elements are co-shaping each other in a dynamic process. And we need to to take this experience further.

More blogs to come …

During the last few weeks we have been preparing our contributions to the final deliverable of our EU-funded Learning Layers (LL) project. And obviously, my recent blogs have included a lot of ‘loud thinking’ on these contributions. Due to the fact that we have had a complex innovation process in the Construction pilot to report, I may have been repeating some issues when discussing in different posts our various deliverables (Impact Cards, Learning Scenarios and Research Methodology documents). Also, I have noticed that with several iterations in writing I have got the message clearer. Thus, I have been able to highlight the characteristics of the innovation processes and the way different parties worked together to make them happen.

In the final phase I have been working with the question, how to present our research work as a contribution to the innovation process (that we have gone through with our application partners):

• Can we claim that we have applied a ‘method’ that triggered an innovation process into movement and guided it into good results? Can we present this ‘method’ as the legacy of our project?
• Or – is our project experience to be interpreted as a more complex process innovation in which we played a part – as active contributors, moderators and conceptual interpreters, but yet as part of a common story? Shall we present such a story of research & development dialogue as our legacy?

Below I will present the answers that I have given to these questions in our document “Accompanying Research and Participative Design in the Construction Pilot in Germany“.  I hope that the extracts from the longer report text give a clear idea, what our answer is and why.

The starting point: relatively open user-initiated co-design process searching for solutions

“This document presents a picture of the collaboration of researchers, technical partners and application partners in the construction pilot of the Learning Layers as a multi-channeled research & development  (R&D) dialogue with an emphasis on the following points:

• The co-design activities started as a relatively open search for solutions to match the user-initiated design idea (digitisation of learning contents and reporting processes).
• Research partners were engaged as accompanying researchers with co-shaping roles to support application partners in a complex iterative process, during which the initial design idea was transformed into shaping of Learning Toolbox as an integrative toolset.
• The R&D dialogue was maintained with several parallel activities – joint work process analyses, shared training events, co-design workshops and joint outreach activities. In this way the process could overcome periods of rupture and uncertainty.
• The research interventions consisted of empirical studies and conceptual inputs that gave insights into vocational learning and learning in organisational contexts as contexts in which the Learning Toolbox promoted digital transformation.”

Reflections on the process: Multi-channeled R&D dialogue with many interventions and iterations

“In the light of the above it is apparent that the work of accompanying researchers was not a process that would have guided by one single ‘method’ or pre-defined methodology. Neither was it a case of classical action research. As has been indicated earlier, the ITB team built upon earlier experiences with accompanying research in innovation programmes but adapted its approach to a more open co-design process. Also, it is worthwhile to note that the co-design process was not primarily about social shaping of work and (production) technology or about pedagogic development of vocational education and training. The project was based on interventions to introduce digital media and web resources via mobile devices to (informal) learning at workplaces.

From this perspective it is important to understand that the co-design activities in the Construction pilot were not primarily a tool-centred and design-driven process. Instead, in the early phase the accompanying research partners and application partners were supported by technical partners with intermediate role (but not that of software developers). Under these circumstances it was important to generate a multi-channelled R&D dialogue that included work process analyses, co-design sessions and shared learning activities. In this context the partners could agree on a radical transformation of the design idea, which meant a shift from digitisation of learning content to shaping a flexible digital toolset for accessing and sharing learning resources.”

The experiences of researchers and practitioners – working towards, with and for the innovation (‘Learning Toolbox in practice’)

“In this – essentially transformative – process of R&D dialogue, in which all partners involved have to face new challenges, the role of ITB researchers can be characterised as agile accompanying research. By learning together with application partners, how to work as change agents, ITB participated in the process, documented the process and supported the continuity of the process. In the final phase the peer tutoring by accompanying researchers was crucial for spreading the use of Learning Toolbox among application partners.

For the application partners – in particular for trainers in Bau-ABC – participation in such R&D dialogue has provided a chance for becoming in real terms co-owners of innovations. In the shaping of the Learning Toolbox this has not been merely a matter of receiving the end product that was the originally expected outcome. In this co-design process the trainers have firstly reshaped their own informal learning processes in the context of the training interventions of the project. After the successful piloting with the Learning Toolbox they have the chance to continue as innovation leaders in their own trades and as multipliers of innovation in their wider networks.”

– – –

I guess this is enough of the position and contribution of research in the process we have gone through. However, the picture would be incomplete if I wouldn’t discuss the role of training interventions as a part of this R&D dialogue experience. Only by looking at both key elements of our process history we can really understand the legacy of our project. I will deal with this in my next post.

More blogs to come …

In my recent blog I reported on a fresh web publication – the Learning Toolbox Chronicle – that is available on the website of our EU-funded Learning Layers (LL) project. The articles published one by one on the project website and its section for the Construction pilot have been rearranged as a collection that consists of three volumes.

In a similar way I have prepared a new web document on the two training programs that we have organised as a part of our project activities: the early Multimedia training (2013-2014) and  Theme Room training (2015) in the training centre Bau-ABC. I have prepared a comprehensive overview on the programs, their implementation and on the training materials used as the Moodle application “Theme Room Training 2015”. Below I present firstly an overview on this moodle application and then some reflections on the role of this training experience in the final phase of the project activities.

Insights into the “Theme Room Training 2015” Moodle

This Moodle application provides an overview of the “Theme Room” training concept and its implementation as a part of the Learning Layers (LL) project and its Construction pilot in Germany in 2015.

The first section of this Moodle application give an overview on the role of training activities in the Construction pilot and on the evolution of training concepts.

The second section gives a brief overview on the Multimedia training scheme that was implemented by the project in Bau-ABC in 2013-2014.

The third and fourth sections describe the development of the Theme Room training concept and its adaptation for the pilot implementation in 2015.

The fifth and sixth sections give insights into the work with the two main themes selected for this implementation cycle – ‘Use of Social Media in Training’ and ‘Preparation of Digital Learning Contents for Training’.

The seventh and eighth sections give insights into two further themes – “Intellectual property rights (IPR)” and “Using Learning Toolbox (LTB) as Support for Training”. For practical reasons the theme IPR was implemented only as transversal theme that was covered with short ‘guest inputs’ in the thematic workshops. The LTB was postponed for a later occasion.

The ninth section summarises the discussions in the self-evaluation workshop that took place in Bau-ABC in December 2015 after the implementation of the first cycle of Theme Room workshops.

The tenth section reflects the Theme Room training experience in the light of the later progress with the Learning Toolbox pilots and outlines some prospects for follow-up activities.

In addition to the documentation in the introductory boxes this Moodle application provides a comprehensive archive of concept documents, training materials, documents of learning achievements and commentaries on implementation.

Reflections on the role of the Theme Room training experience at the end of the project

Shortly after the pilot implementation of the Theme Room program we had to shift the emphasis to the introduction of Learning Toolbox (LTB) into apprentice training and to co-development of LTB-applications by Bau-ABC trainers. Following the example of Bau-ABC trainers, also other application partners of Learning Layers started with their small-scale pilots in the context of construction work.

Reports on these pilots have shown that the use of LTB has increased the opportunities to empower the learners and to strengthen the culture of project-oriented and self-organised learningin Bau-ABC. Equally, the functionality of the LTB has opened new prospects for supporting creative learning in the context of Health and Safety or trade-specific DIN norms. Yet, with such areas LTB alone is not enough. Therefore, the LTB development is looking at the potentials of LTB integrated with a learning platform (such as Moodle).

In the light of the above it appears that the use of the Learning Toolbox (as an integrative toolset) can play a stronger integrative role also in such multimedia training that was provided in the Theme Room training in Bau-ABC. Equally, when the use of LTB is spreading to new pilot fields, it is appropriate to make use of similar collaborative learning arrangements as in the Theme Room workshops. From this perspective it is appropriate to revisit the Theme Room experience and to consider, how such training can be developed and adapted for new contexts and challenges.

– – –

I think this is enough of this new document on our training experience. In the coming days I have to work (once more) with the final deliverables of the project. But we are reaching the point when we have presented the results and realise, what all we have learned in this project – and on what legacy we can build.

More blogs to come …

One of the final efforts of our EU-funded Learning Layers (LL) project has been the rearrangement of the dissemination articles that we had published on the LL website, section “Construction”. At the end of the project we felt that we should make it accessible as a more structured documentation of the process we went through with our construction sector partners. However, we knew that we cannot make intensive editing operations – the materials were already there and we could at best make them more attractive by providing easier access to them. Secondly, we needed to think beyond our project experience and to open perspectives for follow-up activities. This gave rise to present the history of Construction pilot as the story on the making of its main result – the Learning Toolbox. And so the articles of past years were give a new life as the “Learning Toolbox Chronicle” and as “Learning Toolbox Chronik (Deutsche Version)”.

Insights into the Learning Toolbox Chronicle (English version)

Under the new heading the articles appear as three volumes (annual chronicles):

Learning Toolbox (LTB) Chronicle Vol. 1, 2014  covers the early phases from the Application Partner Days (APD) and from the early co-design activities (2013) to the outreach activities with the LTB concept in 2014 (Brunnenbauertage, Demo Camp, Nordbau and a smaller demonstration workshop with two active craft trade companies).

Learning Toolbox (LTB) Chronicle Vol. 2, 2015  covers several interim events starting with the opening of the ‘Learning exhibition’ of our partners in ecological construction work in Verden and with the annual Training Day of the Bau-ABC staff. Later in the year we had workshops and conferences in Espoo, Bremen and Budapest and alongside the Bremen conference the publication of the LTB Beta version. This was celebrated with a field visit in Bau-ABC and with special sessions in the Bremen conference. (And let us not forget the visit of the Singapore Workforce Development Agency to Bremen to inform themselves of the Learning Layers project and of the emerging Learning Toolbox!)

Learning Toolbox (LTB) Chronicle Vol. 3, 2016  covers major training interventions (the Theme Room training campaign) and a series of pilot activities and field events in Bau-ABC Rostrup (the major pilot site for the LTB). We also get insights into using the LTB for coordinating construction work processes at a special construction site in Verden.

Insights into Learning Toolbox Chronik (Deutsche Version)

In principle the German versions of the Chronicles cover the same developments. However, the number of articles is smaller (since we have only included articles of the years 2014 and 2015) that are closer to the application partners. But regarding the year 2016 we have covered all events and activities.

Bonus tracks and Online Guide

One of the highlights of the year 2014 was the joint effort of Bau-ABC colleagues to produce a series of videos on possible use of the LTB in their training and in construction work. These videos are also accessible via both language versions of the LTB Chronicles, see

Learning Toolbox videos from Bau-ABC (2014) – Overview 

One of the highlights of the year 2016 has been the publication of the Learning Toolbox Online Guide. It can also be accessed via the the Learning Toolbox chronicles.

– – –

I think this is enough of the new Chronicles. I hope that they serve their purpose and provide inspiring insights into the making of the Learning Toolbox. For us who were involved in this process they provide an opportunity to celebrate our joint achievements – researchers, practitioners and developers, all working together. And we already know that Learning Toolbox has a future beyond the current project.

More blogs to come …

With my three previous blogs I have started a series of posts to wrap up the experiences of our EU-funded Learning Layers (LL) project. As I have indicated, we are preparing contributions for the concluding deliverable of our project. In my previous post I discussed, how we are showing impact of our project with Impact Cards. Then I discussed, how this can lead to a particularisation of the picture. As a contrast, I tried to bring together the messages of different cards to show, how our interventions in the Construction pilot have had impact in terms of promoting digital transformation. However, my examples remained at the level of presenting local and context-specific success stories and progress reports. This gives rise to the question, what is the value of these achievements in terms of promoting the presented innovations. And this then leads to the question, on what grounds we can interpret this potential.

Below I will discuss these issues in the light of the two Learning Scenarios that we have prepared on the basis of the Construction pilot. In both examples we introduce firstly an exemplary case on the use of Learning Toolbox (LTB). On the basis of such a case we then draw scenarios for further work with LTB and for dissemination of the innovation. And with both examples we can demonstrate the role of research and of our theoretical work in interpreting the impact.

LTB on construction site – the scenario on the work with multiplier networks

In the first “Learning Scenario” on cross-organisational learning with used as a starting point Thomas Isselhard’s presentation on the use of LTB as support for coordination of the work at a construction site and for real-time communication on plans, orders and reports. In the two videos recorded on his presentation Thomas gives a picture, how the use of LTB can help to avoid communication gaps between different parties involved (video 1) and how to get new users accustomed to work with LTB (video 2). The background text in the ‘Learning Scenario’ draws attention to the way in which the the functionality of LTB help to overcome the gaps. In a similar way the text draws attention to the benefits of LTB as an integrative toolset – customised for the users and by the users with their own sets of context-specific stacks and content tiles. Furthermore, the videos and the text give insights into the ways in which new users are introduced to using LTB while getting their instructions for the construction work.

This exemplary case shows the potential of making interactive use of LTB as a common integrative toolset for sharing knowledge and information between different parties at a construction site. In the ‘Scenario’ part of the document we step out from the site and shift the emphasis to different organisations and networks involved in construction sector. Thomas Isselhard is a member in several networks on ecological construction work and these networks have a wide range of specialised cooperation partners. In this respect the ‘Scenario’ outlines a spectrum of activities via which these networks can promote the use of LTB in sharing knowledge and promoting cooperation in ecological construction work and in different campaigns for awareness-raising.

LTB as support for apprentice training – the scenario on supporting learning in special learning areas

In another “Learning Scenario” document we draw attention to the way in which full-time trainers (Lehrwerkmeister) in the intermediate training centre Bau-ABC Rostrup have used LTB to support their training. In the background sections the document gives insights into the transition from working with paper-based materials to creating web-based resources that are available via trade-specific stacks and content tiles.

In further sections we present results from field visits in which researchers have had interview sessions with the trainers and focus groups with apprentices. Here we found an interesting difference between otherwise similar approaches:

• Trainers who follow a problem-oriented training strategy tend to equip  learners with comprehensive resources. The apprentices need to search as self-organised learners  to find the problem-relevant information. In a nutshell, the LTB can be characterised as a ‘well’.
• Trainers who follow an interest-oriented training strategy tend to provide in the beginning fewer resources and only gradually open access to new resources. The learners are nurtured step-by-step with new impulses and challenges once they have started to find their own solutions and ways of working. In this case, the LTB can be characterised as a ‘watering can’.

In the ‘Scenario’ part we stepped out of the trade-specific contexts of apprentice training and shifted the emphasis to specific challenges in the training of Bau-ABC. One issue that the Bau-ABC trainers had raised already at an early stage of the project was, how to make training in Health and Safety (Arbeitssicherheit und Gesundheitsschutz) more inspiring. Another issue was, how to provide easy and filtered access to DIN norms that are relevant for skilled workers. For both cases it is possible to provide interim solutions by providing an overview on the sets of resources via Moodle (or similar platform). Then linking LTB to the respective Moodle application (or similar application) the users could find the resources easier (‘LTB as a well’). However, in the training with these resources it would be possible to introduce some kind of ‘gamification’ to guide the learners from tasks that require general knowledge to more demanding cases that require special expertise (‘LTB as a watering can’).

Reflections

We have also used these documents to highlight the role of our theoretical work in interpreting the impact demonstrated in these exemplary cases (as a basis for the scenarios):

• We have interpreted the first case – the use of LTB at the construction site in Verden – as a micro-case that demonstrates organisational and cross-organisational learning in a local context. Here we underline that ‘organisational learning’ is not merely a result of good management skills or good consultancy. Instead, the key point is in finding the way to promote interactivity and responsiveness between site manager, craftsmen and stakeholders involved. This point has also been highlighted in the concept ‘work process knowledge’ that we have discussed in the project on several occasions.
• We have interpreted the second case – the Bau-ABC trainers’ transition to use LTB – as an example of gradual digital transformation and as enhancement of their pedagogy. Here, it is worthwhile to emphasise that the trainers have challenged apprentices to become self-organised learners and to take ownership on their learning. With the use of LTB they have seen more possibilities – and the learners have felt themselves more empowered. In this way the use of LTB has strengthened the training and learning culture based on action-oriented learning in Bau-ABC.
• We worked out these interpretations in the latter case by combining the empirical findings of a visiting evaluation researcher, the process-related knowledge of a ‘local’ accompanying researcher and the insights into instructional designs provided by an educational technology researcher. In this way way came to interpret the changes in Bau-ABC as indications of a digital transformation based on step-by-step transitions – not as an abrupt digital revolution with great leaps to unknown. Moreover, we could conclude these changes as contributions to the Bau-ABC approach that celebrates action-oriented learning – not as a radical paradigm shift in pedagogy.

– – –

I think this is enough of our work with the ‘Learning Scenarios’ and altogether on the theme ‘digital transformation’. In the coming days our deliverables will take shape and will be made available in due time. There is some more work to be done, but most of the Learning Layers experience is getting wrapped up. Then we have to prepare ourselves for the follow-up.

More blogs to come …