In my recent blogs on the EU-funded Learning Layers (LL) project I have mostly focused on our pilot activities in the construction sector – and in particular on the introduction of the toolset Learning Toolbox (LTB) in the training centre Bau-ABC. This week we are again having field events in Bau-ABC but the main emphasis is given on the introduction of the complementary tools AchSo and SoAR that are presented by our colleagues from Aalto University (Finland). Alongside these activities our colleagues from the University of Innsbruck (UIBK) have been organising focus group meetings to get feedback on the use of LTB in the pilot groups that started with this toolset in March. In this first post I will focus on the introduction of AchSo and how it was received by Bau-ABC trainers (Lehrwerkmeister) and apprentices (Azubis).

Development of and piloting with AchSo in Finland

Whilst the Learning Toolbox (LTB) has been developed in the context of the co-design process in construction sector – and Bau-ABC as the main pilot environment to support the process – the development of AchSo has mainly been promoted in Finland. The LL partner Aalto University (later on referred to as Aalto) has taken further the video annotation tool that was so far developed by RWTH Aachen. With the name “AchSo” the developers want to highlight the usability of a video annotation tool in the context of (informal) learning at workplace. This is achieved by the functionality for shooting short videos, for visual tagging of details and for adding short written comments.

As has I have reported earlier on my blog and on an article on the LL website, the Aalto team has piloted with the AchSo tool with a Finnish construction company, regional vocational school centres and with the Finnish Construction Workers’ Trade Union (see my blog of the 27th of March 2015 and the article of the 7th of July 2015 on the Learning Layers website). In the Finnish construction pilot the users of AchSo were trainees in full-time vocational schools that were completing their workplace learning period (Praktikum) in construction companies or apprentices that had switched from full-time education to apprentice contract. In both cases the vocational school teachers were responsible for the final assessment of the learning of trainees and apprentices. By using annotated videos the trainees and apprentices could document their working and learning tasks and demonstrate their learning gains.

Introduction of AchSo to apprentices and trainers in Bau-ABC

Now that we – the had got the pilot activities with the LTB started and some progress had been made, it was an appropriate time to introduce the AchSo tool and explore, how it could be integrated into the ongoing piloting with the LTB. For this purpose two colleagues from Aalto – Sanna Reponen and Matti Jokitulppo – came for a three-day event to introduce AchSo to different groups of apprentices. During the first day they presented AchSo to a group of well-builders (Brunnenbauer) who had already used LTB when being trained in their own trade. Now they were receiving training in the neighbouring trade of machine- and metal techniques. In this context the Bau-ABC colleagues chose to add the work with video annotation as an additional feature to the apprentices’ projects.

We started together with the group of apprentices when they were beginning their first mini-projects (duration one day) with metalworking. Firstly Sanna Reponen  gave the background information on AchSo and how to use it. In this context we also clarified the data protection, privacy and sharing-related issues when using such tools. Secondly the apprentices installed AchSo on their own devices or got spare devices from Aalto for the session. Thirdly the Bau-ABC trainers introduced the project task – cutting a metal plate to a measure, filing the edges and marking spots at given distances for further processing. This ‘project’ is a traditional elementary exercise with which apprentices and trainees are guided to pay attention to appropriate use of tools and to paying attention to quality requirements. After the introduction the apprentices started working with the tasks and – once they had made some progress – shooting videos of each others’ work at different phases. Parallel to this, one of the trainers also shot some videos on the work of apprentices.

It appeared that some apprentices shot only one video, whilst some others tried to cover all major phases of work with short video clips. One of the videos showed deliberately inappropriate use of tools. Others tried to portray good practice. At the end of the day the videos were shown as a gallery and some exemplary videos were played. In particular the videos with comments were shown. After this viewing we had a discussion on the benefits of the tool, on possible improvements that apprentices would wish and on the prospects for using it in the training at Bau-ABC and in the companies (with which the apprentices have their apprenticeship contracts).

Immediate feedback on working with AchSo

On the whole the apprentices were positive about shooting videos – although it was an additional task and required cooperation, whilst the project task was individual and each one had to complete it on his own. In the discussion the apprentices emphasised that they paid more attention to different phases of work when selecting, which of them to be documented with videos. The trainer emphasised that videos shot by apprentices gave him a better overview on the work of apprentices (instead of just going around the workshop and monitoring them individually in the short time). Secondly, it was agreed that such a documentation of training that takes place in Bau-ABC workshops makes it easier to inform the vocational school teachers of the the tasks that have been carried out in the training centre. At the moment the apprentices agreed that it was easier to start using the new tool with such elementary exercises. Yet, they saw more potential and more challenges in integrating the use of annotated videos into the more complex projects in well-building (Brunnenbau).

We also discussed some hurdles and limitations for using AchSo in real work situations (these were very similar to the issues that came up with feedback on LTB, so I will take these up in my next post). However, the trainer of the well-builders, Lothar Schoka, expressed his interest to get from his apprentices annotated videos from construction sites of their companies. These could highlight specific working tasks that could be observed on joint visits of the whole group or discussed more thoroughly in training sessions in Bau-ABC.

– – –

Altogether, we had the impression that the introduction of AchSo in this group worked well. However, we became aware of some technical issues that need to be observed when proceeding from such initial introduction to wider use of the tool. Yet, it appears that the use of AchSo as a complementary tool to LTB is not a problem to the trainers or to the apprentices. In my next post I will report on the feedback that we got in the sessions organised by the UIBK colleagues alongside the work with AchSo.

More blogs to come …

In my two previous posts I have blogged on a new phase of our EU-funded Learning Layers (LL) project. In the Construction pilot we have started cooperation with a spin-off project. The German-funded DigiProB project focuses on the training of  certified construction site managers (Geprüfte Polier) – see more on this training and on the background of the project in my two previous posts. In this post I will have a look at the discussions between the technical partners of both projects on the usability of the Learning Layers tools in the new context. But firstly, I need to recapitulate, what kind of change of perspective is taking place in the transition from the LL project to the spin-off project.

Changing the perspective from apprentice training to continuing vocational training (CVT)

So far the pilot activities of LL project in the training centre Bau-ABC have focused on initial vocational education and training (VET).  Thus, the LL project has worked with apprentices and full-time trainers who are present in intermediate training centres (in workshops and on outdoor training areas). In such contexts and the processes instruction, tutoring and peer learning rely on the presence of a learning community.

The change of perspective to the CVT programme for certified construction site managers (Geprüfte Polier) brings into picture a completely different learning environment. The participants are former craftsmen who are in the process of transition to managerial positions. The training programme is based on a 2-month period of courses and a subsequent period of self-organised learning alongside working. In the latter phase the participants are expected to complete integrative learning tasks and to prepare a project report that demonstrate the acquisition of required coordination and management competences.

In the light of the discussions in the preparatory phase (see my first post in this series) and taking into account the messages coming through in the initial interviews (see my second post) it is possible to raise the following questions concerning the introduction of digital media, web support and mobile devices into such a training programme:

1. What can be the role of social learning platform(s) as support for integrative pedagogic approach and as support for self-organised and/or collaborative learning practices?

2. What can be the role of digital learning materials provided by guest trainers/lecturers in supporting the work with integrative learning tasks and project reports?

3. What can be the role of digital documents in facilitating the self-organised learning processes and presenting the results of project work?

4. What can be the role of mobile devices and mobile app frameworks in facilitating learning in the context of work and in sharing knowledge and experience with peer learners?

Sharing knowledge between technical partners of LL and DigiProB projects

The above presented questions were implicitly in my mind in the light of our experiences in the LL project and taking into account the shift to the new project. However, in the preparatory meeting of both projects we first explored, what kinds of tools the LL project has developed and in which contexts they have been piloted. In this discussion most attention was given on the Learning Toolbox (LTB) – the integrative toolset with which Bau-ABC is making experiences in several trades. In addition, we took up in particular ‘Bits and Pieces’ (Erfahrungssammler), ‘Living documents’ and ‘Confer tool’ (for collaborative knowledge processing) as different individual tools that can be linked to each other.

Altogether, we concluded that many of the LL tools address some aspects of the R&D agenda that needs to be developed in the new project. In this respect this meeting between the two project needs to be followed up in the near future.

More blogs to come …

In my previous blog I started a series on the new phase of our EU-funded Learning Layers (LL) project. Currently, in the Construction pilot we have been able to start closer cooperation  with a spin-off project. The German-funded DigiProB has started its work and the training centre Bau-ABC and the research institute ITB have a central role to play. The DigiProB project focuses on the training of  certified construction site managers (Geprüfte Polier) – see more on this training and on the background of the project in my previous post. In this post I will have a look at the initial interviews and what we may learn from the dialogue with gust trainers/lecturers who are engaged in this training programme.

The reform of the training concept and tensions in the implementation

As I indicated in the previous post, the new training of the certified construction site managers had introduced a new examination model that put an emphasis on integrative tasks and on a concluding project report. In the conceptual preparation for the project proposal we had emphasised the following tensions:

1. The new training regulation was introduced with short introduction events that familiarised the trainers on the new guidelines. However, these events did not provide an in-depth training for guest trainers/lecturers  to adjust themselves to new requirements.
2. The guest trainers/lecturers are engaged as subject specialists and are responsible for specific blocks in the presence training. They do not have an overarching responsibility on the supervision of integrated learning tasks and project work.
3. There has been no clear model for developing online support, arranging peer tutoring and promoting peer learning among the participants.

Now that the DigiProB project was started, the initial interviews provided an opportunity to test, whether the above outlined picture was correct and what new features could be learned from the guest trainers/lecturers involved in the programme.

Messages picked from the initial interviews

Currently I am not actively involved in the initial activities of the DigiProB project. At best I have been nearby when my ITB colleagues have carried out interviews. Therefore, I leave it to my colleagues to report on the activities and on the findings in greater detail and in time. Yet, already at this stage it is possible to pick as ‘first impressions’ some messages that come through and have been reflected by my colleagues. Although these are only preliminary signals, not thoroughly analysed findings, it is worthwhile to pay attention to them:

• Rapid implementation of the new model: It seems to me that both the training providers (such as Bau-ABC) and guest trainers/lecturers that they use for the training have had very little time to adjust their pedagogic approaches. The training providers arrange short introductory events but then the individual trainers/lecturers have draw the conclusions on their own.
• Willingness of trainers/lecturers to work with an integrative pedagogic approach: Although the guest trainers/lecturers have been engaged as subject specialists, they seem to have an interest in getting their special know-how put into practice. Therefore, they are individually looking for ways to link ‘theoretical’ elements into practical tasks and exercises. Moreover, there seems to be interest in sharing experiences and examples of good pedagogic solutions.
• Interest of trainers/lecturers in using digital media and web tools: It appears that (at least some) guest trainers/lecturers show interest in using digital media and web tools to support their teaching and training. In this respect the Learning Toolbox (whenever demonstrated) has been greeted as a promising framework and the interviewees are willing to learn more of it.
  
• Interest of learners to share knowledge and experiences: According to the guest trainers/lecturers interviewed so far, the participants (learners) are interested in sharing knowledge and experiences during the course periods and during the periods for self-organised learning. In particular from this perspective they considered the Learning Toolbox as a promising toolset to support individual and collaborative learning processes.

– – –

I leave these first impressions and ‘messages picked from discussions’ here and let my colleagues work with further interviews and the group pictures that we get as a result. Altogether, I believe that the DigiProB project is well-timed and that the trainers/lecturers as well as the learners will be interested to work with the project. However, the project will also pose new challenges for the tool developers and to the project partners who introduce the tools.

More blogs to come …

Our EU-funded Learning Layers (LL) project has recently entered an interesting new phase. In the Construction pilot the Learning Layers project has a chance to work together and share experiences with a spin-off project. Recently, the German-funded DigiProB has also started its work in the German construction sector. Two LL partner organisations – the training centre Bau-ABC and the research institute ITB – play a major role in the new project that can be called as a spin-off from the LL project. Whilst the LL project is focusing on workplace learning from the perspective of skilled workers and apprentices, the DigiProB project shifts the emphasis on training of  construction site managers. With this series of blogs I try to give a picture of the conceptual preparation for the new project (part one), on the lessons to be learned with initial interviews (part two) and on the prospects for using LL tools in the new project.

I start by looking back at a symposium at the European Conference on Educational Research (ECER 2015) in Budapest that was initiated by the LL team of ITB. In the symposium we brought together three recently completed or ongoing projects with focus on digital media, web tools and support for workplace learning. With their recent work the three projects (Kompetenzwerkstatt, Learning Layers and EmployID) had -reached a transition stage. From this perspective the symposium provided an opportunity to learn from each other and to draw conclusions for a new phase activities. Below, I will focus on the contribution of the LL team in this symposium and on the interim conclusions from the discussion.

Outline of DigiProB presented in an ECER symposium in Budapest 2015

In our contribution to the symposium we shifted the emphasis from the Learning Layers  project to a designed spin-off project (DigiProB) which we expected to be start soon. The context of this project is the training of construction site managers – a vocational progression route for former skilled workers.

In a recent reform the training of certified construction site managers (Geprüfte Polier) has been regulated with new nationwide standards. The tasks of the certified construction site managers include organisation and controlling of work processes, supervision of construction workers, subcontractors and apprentices as well as monitoring the compliance with health and safety regulations. The new examination model with integrative tasks and project work seeks to push forward a more holistic learning culture.

The major challenge for adapting the new requirements in the training scheme lies in the construct of the curriculum. In general, the curriculum is based on a two-phase model. The first phase (ca. two months) is provided by presence courses in the training centre. During this period external part-time lecturers provide courses in the main areas of expertise for the future construction site managers.  The second phase (which has now been shaped in the light of the new regulation) is based on self-organised learning activities of the participants alongside work. This phase includes integrative learning tasks and production of a coherent project report. With the integrative tasks the participants are expected to demonstrate their capability to manage complex construction sites and supervise related work processes. The project report should make transparent their competences in planning, preparing, implementing, documenting and assessing construction projects.

The task of the DigiProB project is to introduce digital media and web tools to support integrative learning of the participants (with the learning tasks and project work) and pedagogic reorientation of the trainers (to facilitate the learners in such learning).  Here, the new project DigiProB should take into account the prior work of the Learning Layers project.

Interim conclusions of the discussion at the ECER symposium

In its contribution the ITB team drew attention to  following tensions between the new requirements, the traditional mode of delivering the courses and lack of support for the self-organised learning:

1. The new training regulation was introduced with short introduction events that familiarised the trainers on the new guidelines. However, these events did not provide an in-depth training for trainers to adjust themselves to new requirements.
2. The part-time trainers are engaged as subject specialists and responsible for specific blocks in the presence training. They do not have an overarching responsibility on the supervision of integrated learning tasks and project work.
3. There has been no clear model for developing online support, arranging peer tutoring and promoting peer learning among the participants.

The interim conclusions of  the ITB team were formulated as follows: For the new spin-off project it is necessary to build upon the experience with the Learning Layers pilot but to take into account the differences between presence learning within training centre (supervised by full-time trainers) and dispersed self-organised learning (supervised by part-time trainers). Secondly, it is essential to equip the trainers with didactic know-how and learning technologies to support the dispersed learning activities. Thirdly, it is crucial to facilitate peer learning among the participants and to raise their awareness of their own learning.

– – –

At this point I leave our discussions at the ECER symposium behind. Now that the DigiProB project has started its initial activities, it is interesting to see, what kind of new experiences we are making and how the initial picture starts to change. From this perspective it is interesting to have a look, what we are learning from the initial interviews and from the dialogues on the usability of LL tools in the new project. These topics will be discussed in the next posts of this series.

More blogs to come …

In my two previous posts I have blogged about pilot activities with Learning Toolbox (LTB) in the context of our EU-funded Learning Layers (LL) project. In the first post I reported of the Kick-off event in the training centre Bau-ABC (on 14.3.2016). In the second post I reported on our recent follow-up visit (5.4.2016) with emphasis on progress reports in the pioneering groups and on plans to get new groups and learning areas integrated into the piloting. With this final post I focus on technical issues, requests for improvements and on ideas for further development of the tool.

Technical issues

At the moment the WLAN provides rather limited opportunities for using LTB in Bau-ABC. Partly this is due to the weak infrastructure provided by Deutsche Telekom to the area of Rostrup. This issue has been taken up by Bau-ABC to get the services improved – given the nation-wide importance of their training. Given these limitations, the capacity of the WLAN is not ideal. Yet, the colleagues are trying to adjust their settings in such a way that the pilot groups could work with LTB without interruptions. This is subject to internal discussions in Bau-ABC.

Requests for improvements

As we see it, there will be some new trades that could join in the pilot and there is a chance to work with the transversal learning area ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz). This will increase the number of stacks and make the search processes more complicated. In general, the searches could be facilitated by using project titles, group numbers and domain-specific tags as keywords for search. However, if the apprentices are expected to type themselves correctly spelled terms, this will be a hurdle. For apprentices it would be practical to navigate from a menu of the main occupations to the ‘parent stacks’ (in that occupation) and then to recommended tags (this requires efforts from the LTB developers and from the trainers).

At the moment LTB doesn’t provide an online tutorial. This would be appreciated very much. (The ITB and Pont team took this issue as homework.)

The trainers had observed that the apprentices do not notice that they have got new messages if there is no alarm tone alerting them to the fact. This would be a major improvement.

Ideas for further development

The trainers in Bau-ABC are constantly observing the emergence of new apps in their trades. One of the newest newcomers is the BaustellenApp (www.baustellenapp.com) for the road-builders (Strassenbauer) and for the construction site managers in this trade. It is worth checking if this can be linked to LTB.

Also, there is an interesting development in the protection of hearing. The newest earmuffs are equipped with technologies that can pick wireless signals and convert them into audio messages. Thomas Weerts can give more information.

These were some of the issues  were taken up in our latest discussions. As I see it, they give a picture of the constraints, practicalities and possibilities with the current pilots using the Learning Toolbox (LTB). We will continue the monitoring of the pilots and take further steps to engage more users in a short while.

More blogs to come …

On Tuesday the 4th of April we had an interesting working visit in Bau-ABC in the context of our EU-funded Learning Layers (LL) project. I, Lars Heinemann (both from ITB) and Martina Lübbing (from Pontydysgu) were on a whole-day visit in Bau-ABC to collect feedback and situation assessments after the first weeks of piloting with the Learning Toolbox (LTB) (see my previous post). In addition we discussed several initiatives to support the pilot activities during the LL project and afterwards. Below I try to give an account on the points and working issues that are most relevant for the whole LL project.

Building upon the work of the pioneering trades

During our visits in the working areas got a picture how the Bau-ABC trainers had experienced the first weeks of the pilots and how to support the next steps. With the pilot group of carpenters (Zimmerer) the LTB had been received well and also apprentices from other groups had shown interest. (However, this other group is right now preparing for interim examinations, so therefore an introduction of LTB would not be well-timed and can at best take place in the autumn.) The pioneering group will shortly return to Bau-ABC and work in another trade – with the bricklayers (Maurer). This cooperation has been built in into the preparation of the stacks for this pilot group and the trainers (Lehrwerkmeister) Markus Pape and Kevin Kuck have been working together.

A similar possibility is available with the pioneering group of well-builders (Brunnenbauer) which is now having a school period in the same area and then switch to work with the trade of machinery and metalworking (Maschinen- und Metalltechnik). In order to support the use of LTB in that period the pioneering Lehrwerkmeister Lothar Schoka volunteered to contact his colleagues in that trade and advise them on preparing similar LTB stacks for their trade.

Integrating new trades and learning areas into the pilot with LTB

On our visit to the working area of road-builders (Strassenbauer), pipeline-builders (Rohrleitungsbauer) and sewage builders (Kanalbauer) we explored new possibilities to extend the pilots. One of the experienced trainers, Stefan Wiedenstried, is now for the moment working with the pipeline builders and expressed his interest to prepare similar stacks for that trade as his colleagues had done in other trades (and Gilbert Peffer for the road-builders before the kick-off event). In a similar way, the shop steward for health and safety (Sicherheitsbeaftragte) Thomas Weerts expressed his interest to prepare stacks for health and safety instructions for apprentices in Bau-ABC. This learning area was already discussed on an earlier working visit of LTB developers in Bau-ABC in February. Now we have a chance to take this initiative further.

Support measures and further activities

Alongside these talks we discussed the need to update the user’s manual for LTB (originally written by Jaanika Hirv during her internship period in Bau-ABC during November-December 2015). In addition we discussed the need to prepare online instructions  (as a tile or as a stack) that would be easily accessible in the LTB. The ITB-Pont team took this issue with it as homework. As a further step we had discussions on the prospect to start a new cycle of “Theme room” training in Bau-ABC and to introduce the work with LTB as a new theme. Here we expect Bau-ABC to have internal discussions and then we can start preparing the new cycle in greater detail.

I think this is enough of the general picture. We also took up several working issues on the infrastructure, access problems and proposals for improvements. I will discuss some of these in my next post.

More blogs to come …

On Monday the 14th of March we experienced a great day for our EU-funded Learning Layers (LL) project. We had the kick-off event of the piloting with the Learning Toolbox (LTB) in Bau-ABC (the training centre for construction sector in Rostrup). On the whole, this was a manifold event with different sessions and different activities (with focus on tool development, implementation in different trades and evaluation measures). And, moreover, the event was organised as parallel activities in two trades – the carpenters (Zimmerer) and the well-builders (Brunnenbauer). In this post I try to give some first-hand impressions on the sessions with the group of carpenters (and complement them with some remarks on the parallel group of well-builders). I know that the evaluators from the LL team of the University of Innsbruck (UIBK) will give more detailed accounts on these sessions and on their recordings on the talks with apprentices. From my perspective it is important to get a picture on the process that was kicked off with the Learning Toolbox (LTB) to be used by the apprentices.

Introduction of the Learning Toolbox (LTB) in the group of carpenters (Zimmerer)

In the group of carpenters we (the LL project partners) had firstly the chance to present the Learning Toolbox as an integrative toolset to be used in the forthcoming training projects of the apprentices. Gilbert Peffer presented the essentials and then the apprentices installed the LTB apps on their smartphones. Then the trainer of carpenters, Fidi Bruns explained the training project of the next few weeks for the group. After this session and a break, the other trainer of carpenters, Markus Pape, gave an overview of the parent stack and of the daughter stacks that he had prepared for the project. After these introductory sessions we had a group discussion with the carpenter apprentices  (recorded by the UIBK colleagues). In this discussion the apprentices felt very positive about the new toolset and on the prospect to use digital media and web resources in their projects. In a similar way they were keen to get the LTB to work on their devices. They were also pleased to participate in instant debugging talks in the cases in which the installation caused problems.

 Introduction of the Learning Toolbox (LTB) in the group of well-builders (Brunnenbauer)

In the parallel group of well-builders the introduction of LTB had already taken place one week before and the project using LTB had already been started. Yet, there was some need for assistance in the installation as well as real-time debugging. Also, the approach in developing project-related stacks was somewhat different – instead of shaping a parent stack and daughter stacks the well-builders were equipped with a set of thematic stacks that will be networked with each other.

 The way forward

During the event we had teams of ITB (accompanying researchers), LTB developers (RayCom, CIMNE) and evaluators (UIBK). In  addition we had as a special support agent Jaanika Hirv (TLU) who stayed one week in Bau-ABC to collect feedback from apprentices and trainers on their first steps working with the LTB. She reported this feedback with daily e-mails that were collected into a Google Doc. Then, in the second round, Gilbert Peffer and Jaanika had exchanges on these messages (in the same Google Doc). Summaries of the conclusions were then reported back on a German-speaking ‘hotline’ mailing list “LTB Pilot”. In my next posts I will report on a follow-up visit to Bau-ABC and then have a look at the working issues that have come up in our talks and e-mail correspondence.

More posts to come …

Last week we had two working visits to the training centre Bau-ABC in the contexts of our EU-funded Learning Layers (LL) project. The aim of these visits was firstly to clarify, in what kinds of projects Bau-ABC trainers (Lehrwerkmeister) have planned to use Learning Toolbox (LTB) in the forthcoming pilot phase. Secondly we wanted to clarify what measures need to be taken to facilitate the Internet access in Bau-ABC. Thirdly we wanted to clarify, how to link third party apps or complementary tools to LTB to meet specific needs. The two latter points have been covered by internal notes. The first point merits public attention, therefore this blog gives a quick overview on the plans of Bau-ABC trainers.

During the two visits the Bau-ABC trainers presented three exemplary cases for implementing LTB in their training.  The first case (developed together with Lothar Schoka) focuses on apprentices projects in  trade of well-builders (Brunnenbauer). The second case (developed together with Thomas Weertz) deals with training materials and facilitation of learning in the transversal area ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz). During the second working visit a third case was brought to picture by Markus Pape and Kevin Kuck – a joint project of Carpenters (Zimmerer) and Bricklayers (Maurer).

a) The Brunnenbauer-pilot is adjusted to the start of a new group in Bau-ABC and the introduction of the LTB comes along with their induction to project-based learning. The use of LTB will not cover entirely the documentation of project work of apprentices (plans, reports, certificates) but will support it. The main thrust for the trainer is to provide support material (Zusatzmaterial, e.g. Extracts of relevant DIN-norms). Also, the work of apprentices can be supported with digital worksheets (lists of tools and materials) that can be produced with the help of apps made available via LTB. Here, the apprentices could present digital interim versions and get feedback before completing the projects. As a use-case for two-way communication, Schoka indicated that apprentices can produce and share photo sets of construction sites of their companies as eventual targets for on-site-visits of the whole group.

b) Concerning the theme “Arbeitssicherheit und Gesundheitsschutz”, the competent body in the construction sector (BG Bau) has produced a comprehensive set of modularised reference materials (Baukasten) and a special program for young craftsmen. In addition to these, Bau-ABC uses a special compendium for trainers (KomPass). These materials are available on the net. In addition, in each of their projects the apprentices are required to fill a risk analysis form regarding possible occupational hazards with the tasks (Gefährdungsbeurteilung). The advantage of using LTB with this theme is that it enables delivery of compressed information (checklists, extracts of information sheets, model solutions with feedback) as well use of Quiz tools (ordinary quiz or detecting errors).

c) The joint project of Zimmerer and Maurer was based on the traditional technique of building houses with wooden frames and brick walls (Fachwerkhaus). Bau-ABC projects with smaller constructions using that technique serve as cooperation exercises between these two trades. By using LTB and creating a joint stack it is possible to

• give an overview on the common project (as a whole),
• on related standards,
• to distribute the tasks between the trades
• to organise the boundary-crossing exercises of Zimmerer and Maurer in each others’ tasks and to
• coordinate the collaboration between the two trades.

After these working visits we are heading towards the pilots in the coming weeks and arranging the necessary support. We will report more on the pilots when we take further steps with the implementation.

More blogs to come … 

This year I had a longer winter break, so I have started my working year with our EU-funded Learning Layers (LL) project in the middle of January. As a consequence, my first working days have been filled with catch-up meetings in the local and regional contexts and as video-conferences at the level of our European project. I try to sum up the results, challenges and impressions with a series of blogs. In the first one I give a brief report on the first meeting of our local LL team involving colleagues from ITB and Pontydysgu. (A more detailed report is available in the Learning Layers Google Drive document https://docs.google.com/document/d/1lgL4hCjkaRZnrY17E0swQcvxWqR7XvrkmaK2fnUhh_s.)

In our first joint meeting of this year we started with a situation assessment on the piloting with the Learning Toolbox (LTB). My colleagues had taken some time to test the latest version and discovered several points that needed improvement. They had reported them with Trello cards and with an e-mail to the LTB developers – which were well received as precise feedback that is being taken up. On the whole, we are happy that both Android and iOS versions are available. Yet, the fundamental challenge is to introduce interactive communication channels and group functionality. These are the key requirements of the users in training centres and construction companies. Since our main application partner Bau-ABC is now hosting short-term continuing vocational training (CVT) schemes in January and February, there is some time before the apprentices will return, Yet, we (the developers and we as the facilitators) need to get ready to start active piloting in March. We were happy to note that we have a German version of LTB Manual (thanks to Jaanika Hirv from TLU) and an English translation (thanks to Martina Lübbing from Pont). Yet, we need to do more work with training to support the roll-out. (For this purpose we had scheduled a working meeting with Bau-ABC for the next day, see my next blog).

Our second major point was the situation assessment, where we stand with the acquisition of follow-up projects to Learning Layers. Here, several things had happened by the end of the year and were in process in the beginning of the year. Firstly, the pending final assessment on the Learning Layers follow-up project in CVT (support for work-related training and learning of general construction site managers – Geprüfte Polier) is being prepared. Also, the estimated start time has been announced (provided that the assessment is positive). Secondly, the recently approved cluster initiative “Bauen 4.0″ (Construction 4.0) has been approved and the consortium (involving among others Bau-ABC and ITB) has been invited to submit a set of mutually linked project proposals that focus on digital transformation in construction sector (including consequences for training). Thirdly, we have started the preparation of a project proposal for Horizon 2020, Topic “Technologies for Learning and Skills” (taking into account the work of the ITB-project Kompetenzwerkst@tt and of Learning Layers). In addition to this, we (ITB) have been invited as partners to some other proposals that may have a role in the follow-up of the LL project.

In addition to this we discussed about participation in forthcoming conferences and (related) publication plans. Both of these topics will be taken up more systematically in our next meeting.

I think this is enough of our first meeting. On the next day we had a working meeting with Bau-ABC.

More blogs to come …

On the 30th of November and on the 1st of December our EU-funded Learning Layers (LL) project had its third annual review meeting at the European Commission premises in Luxembourg. As usual, the consortium had gathered in advance to finalise the presentations and to ensure that we pass a coherent message. The presentations on our work in the pilot sectors took place on the first day of the meeting. On the second day we had shorter presentations on the development on the technical infrastructure and on the exploitation initiatives. Then the reviewers finalised their feedback and presented their main points to us in the final session. This first post gives insights into the presentations of the first day. The second post discusses the presentations of the second day and the comments of the reviewers.

The coordinator’s overview

In the beginning Tobias Ley (TLU), the scientific coordinator, recapitulated some key facts of the development of the project during the three years of activities. He then underlined the three main objectives for our R&D work that were highlighted in our Critical Path Analysis we had carried in January 2015:

• Large-scale implementation,
• Long-term sustainability,
• Theoretical advance on scaling.

Tobias made it clear that the work with software development (and with interoperability of LL tools/ toolsets, services and infrastructures) had not proceeded quite up to expectations. Yet, we had made progress on all accounts. In this context he highlighted the following aspects:

• Development of new workplace learning technology and pedagogy,
• Providing technology platform for flexible deployment,
• Continuation of co-creation with stakeholders.

This overview was followed by presentations from the two pilot sectors – healthcare and construction – including the presentations/demonstrations of tools that were used in these pilots.

The presentation of the Healthcare pilot

The presentation of the Healthcare pilot (coordinated by Tamsin Treasure-Jones, Leeds) provided firstly an overview on the organisations involved and on the working contexts of GP practices in the pilot region (Yorkshire). Secondly, an overview was given on the three LL tools that had been hitherto developed and tested in three different organisations (“Bits and Pieces”, “Confer” and “Living Documents”). Then, the presentation was continued with two exemplary learning stories that illustrated the practitioners’ (doctors’ and nurses’) work with the tools:

1) The first story – Individual reflection on experience (with patients and its enhancement) into shared learning – focused on the use of Bits and Pieces as tool for archiving, sensemaking and reflecting on work experience. Here the story focused on the needs for antibiotics and issues on sensitivity, allergies and resistencies. In this context the iterative process of tool development was made transparent. In the final phase the material that had been structured was communicated via Living Documents into a trusted communication platform to be shared with other healthcare professionals.

2) The second story – The working group to develop the trainee doctors’ programme – focused on the use of Confer as a tool for progressive inquiry, search for advice and/or collaborative group work. Here the story raised the issue, how to make best use of the very short time for practical training (1,5 hours) and the GP practices. The demonstration showed, how the Confer tool gave structure for the conversations and helped the working group to proceed through predefined steps and reach the phase of recommendations. Here again, the use of Living Documents was introduced to present the results for a wider audience and to enable further conversations based on the recommendations.

Here, both stories highlighted the interoperability of the LL tools. The presentation then gave insights into the role of Social Semantic Server (SSS) and of the Intradoc environment as technical support. Finally, this presentation was concluded by results from interim evaluation and on plans for final evaluation during the final year of the LL project.

The presentation of the Construction pilot

The presentation of the Construction pilot (coordinated by me) differed from the previous one since it was more centrally focusing on the role of Learning Toolbox (LTB) as the integrative toolset. Firstly, the presentation outlined the evolution of the co-design process from the earlier design ideas to the framework of Learning Toolbox. Then it drew attention to the parallel development of co-design, user engagement and capacity-building (before the concept of LTB and during the actual development of LTB). Then the presentation outlined the background of three different pilot contexts:

• the training centre Bau-ABC as an industry-driven training provider for initial vocational training, continuing vocational training and other training services;
• the Agentur (Agency for ecological construction work and its affiliated network NNB) as multiplier organisation with exhibition spaces and regular network activities;
• the Finnish pilot activities initiated by the company Skanska, the construction trade union and vocational schools (with interest on documentation of workplace learning).

This was followed by an online demonstration in which Raymond Elferink (RayCom) presented how Learning Toolbox can be used by a Bau-ABC trainer to prepare stacks of digital contents, to send a related task to apprentices working at distance and to monitor the reception of the message. Marjo Virnes (Aalto) took the role of an apprentice and recorded a  video with the AchSo! tool that presented a safety hazard risk at workplace. She then annotated the video and shared it with a group (using all the time AchSo! via LTB). Raymond then took the role of another apprentice and received the shared video via his smartphone (using AchSo! tools that was integrated into LTB).

After these demonstrations Melanie Campbell (Bau-ABC) informed of the Multimedia training program based on the Theme Rooms (see my previous blogs) and on the role of this training in enabling the Bau-ABC to become a stronger multiplier-organisation for the LL tools. Michael Burchert (Agentur) gave insights into the possibilities to link the use of Learning Toolbox to the recently opened permanent exhibition on ecological construction work and to related training events. Marjo Virnes presented insights into the Finnish pilots with AchSo! as a stand-alone tool and on the results of their field studies.

In the final phase the presentation was complemented by inputs on the role of Social Semantic Server, then on the role of our theoretical work in the project (as support for design activities and training) and on the evaluation activities (interim results and plans for year 4).

Here again, we presented an integrated story that brought together different pilot contexts and the work with integrative toolsets.

At this point we reached the end of the first day. I will report on the further presentations and on the feedback from reviewers in my next post.

More blogs to come …