One of the most successful spin-offs from our EU-funded Learning Layers (LL) project has been the use of the Learning Toolbox (LTB) in conferences to prepare ePosters. As regular readers of this blog know, I have covered the work of the project and its construction pilot since 2012. And in the recent years (during final phase of the project and in the follow-up phase) I have written a lot of the flexible mobile toolset that was named “Learning Toolbox( LTB)” since it was designed to support vocational and workplace learning in the construction sector. BUT one of its most interesting applications has been the preparation of ePosters as an alternative for traditional paper posters. And, as I have written (somewhat enviously), our colleagues have been successful in introducing it to conferences of medical educators (AMEE), dentist educators (ADEE) and educational technologists (EC-TEL). However, now it is the time to announce that LTB will be introduced into our field – to the European Conference on Educational Research (ECER) in the annual conference of the European Educational Research Association (EERA) that will take place in September 2018 in Bolzano/Bozen in Italy. Below I will give a brief report how this has come into being and what we are doing next week in the conference.

The two proposals: a special EERA session and the VETNET network project

During the preparation of the ECER 2018 we (the VETNET network) prepared two proposals. Firstly, we proposed to have a specific EERA-wide session to promote awareness on the usaes of LTB for shaping ePosters in research conferences. Parallel to this we prepared a proposal for an EERA-funded “Network project” to be implemented by the VETNET network. Both proposals were linked to the idea to organise an interactive VETNET poster session in which the authors would presented their posters as ePosters within the VETNET programme. We were happy to see that the proposals were approved by the EERA authorities and that we could go ahead with the initiative.

The preparation of the VETNET pilot with ePosters

During the preparation phase the LTB developers prepared a special web page “FAQ ECER” in whch they gave all possible advice for the conference participants who had proposed posters for the ECER programme. With short instruction videos and with a well edited Webinar recording the authors were advised, how to enrich their original posters into ePosters by using the LTB.

Getting ready for the conference

During the last few weeks we have made the positive experience that all authors have been able to make use of the LTB and prepared their own ePosters. Now they are available on the page “EERA showcase“.

In addition, I have prepared my presentation for the EERA session (on the research background and usability of the LTB) also as an ePoster (or hybrid presentation) using the LTB. And furthermore, I have prepared my presentation “Transfer of Innovation after the Learning Layers” also as an ePoster (or hybrid presentation) with the help of LTB – or as we could call it in this context “the EERA-Toolbox”.

So, we have done quite a bit of work to bring the ePosters to the ECER 2018 and to demonstrate that the EERA could follow the example of other conference organisers. We are eagerly looking forward, how our pilot sessions will be received and what kind of feedback we will get from the authors and the audience. I will surely report on that in a short while.

More blogs to come …

With my two latest blogs I have been started a series of  posts with which I want to take further steps with the ongoing EU-funded TACCLE4-CPD project. In the first post I gave a nutshell description, how our institute (Institut Technik & Bildung, ITB) positions itself in the current TACCLE project as the partner responsible for the field of vocational education and training (VET). With the next post I summarised the legacy of the predecessor project Learning Layers (LL), and how we have been able to continue the work with the Learning Toolbox (LTB) – the main result from the LL Construction pilot – in its successor activities. With this post I will give a brief overview on the neighbouring ITB projects that focus on introducing digital media and web tools in the field of VET and on training of teachers and trainers.

Mapping the neighbouring projects – what for?

We started our discussions on the approach that ITB should take in the TACCLE4-CPD project with the question, how we could at best support for continuing professional development (CPD) activities in the field of VET. Our earlier activities in the LL project had brought us quite far in a strong multiplier-organisation in the construction sector (the training centre Bau-ABC Rostrup). Also, in the follow-up activities we had been able to witness, how practitioners in VET are ready to use the Learning Toolbox (LTB) in different contexts. Yet, we were short of an overview, what else is going on in projects that promote the use of digital media and web tools to support vocational learning and/or (informal) learning in organisational contexts. In order to fill this gap I interviewed several of my ITB colleagues and prepared a similar moodle-based overview as I had done on the training activities in the LL project and on the shaping and further use of the Learning Toolbox. The newest overview has the title “Digital Media, Web Tools & Training of Trainers – Overview of current projects alongside TACCLE4-CPD” and can be accessed via the following link (using the guest login):

http://moodle.itb.uni-bremen.de/course/view.php?id=14

Below I will give brief characterisations on the projects that I have explored and on their neighbourhood relations with the ongoing TACCLE4-CPD project.

Research-intensive projects with focus on the pedagogy of VET and workplace learning

The exemplary projects for this theme are in particular the following ones:

• The DieDa project studies empirically, how patterns of self-organised learning are developing in continuing vocational training for ecological construction work (and in parallel cases of CVT provisions in other sectors).
• The INTAGT project studies vocational learning and issues on health & safety in companies that introduce ‘Industry 4.0’ and draws conclusions for the development of VET provisions.

With these projects I experienced the closest neighbourhood relation to TACCLE4-CPD and also the greatest interest to work with the Learning Toolbox (LTB) as support for training the trainers.

Support for digital strategies and creative learning designs in vocational schools

The exemplary projects for this theme are in particular the following ones:

• The STRIDE project supports the development of digital strategies in partner schools in Ireland, Italy, Turkey and Poland. The partners from Germany (ITB) and Spain serve as expert partners that coordinate the studies and the training workshops.
• The RISE project promotes Design thinking and creative learning arrangements in vocational schools. The three partner schools and three expert organisations from Germany (ITB, Wilhelm Wagenfeld Schule), Spain and Slovenia develop concepts of ‘social enterprises’ and ‘innovation hubs’ to promote such concepts and validate the ideas in several workshops.

With these projects the working concepts are somewhat different but there are common interests – also concerning the use of the Learning Toolbox (LTB).

Support for learning and knowledge processes in specific occupational contexts

The exemplary projects for this theme are the following ones:

• The NABUS project for supporting training in ecological construction and renovation work.
• The MeMoApp project for supporting the use of mobile apps and digital tools in the logistic and transport occupations.
• The LiKa 4.0 project for promoting innovation transfer from the previous Kompetenzwerkstatt projects to craft trades.
• The LaSiDig project for promoting health and safety awareness in the logistic and transport occupations.

Here the projects were rather heterogeneous and some of them were at the beginning stage, whilst others had very dedicated software solutions. Therefore, further talks were needed to clarify the cooperation prospects.

—

I guess this is already enough for a first look at the neighbourhood. I will get back to most of the projects in April to specify, how we can develop further cooperation.

More blogs to come …

With my latest blog I started a series of blog posts with which I want to take further steps with the ongoing EU-funded TACCLE4-CPD project. Already in December I had posted of our kick-off meeting and shared some links to videos that presented the work of earlier TACCLE projects (that equipped teachers with capability to use digital tools and to create online content for their teaching). Now, the current TACCLE project – the fourth one – is focusing on continuing professional development (CPD). The partners from different countries focus also on different educational sectors (general education, adult education, vocational education and training (VET)). Moreover, the partners bring into the project different background experiences in introducing digital tools and web resources as well as enabling the practitioners to reach e-maturity in their own context.

In my previous post I gave a nutshell description, how our institute (Institut Technik & Bildung, ITB) positions itself in the project as the partner responsible for the field of VET. With this post I try to give an idea, how we worked in the predecessor project Learning Layers (LL), and how we have been able to build on the legacy of the project and its successor activities. In particular I will highlight the training activities and the piloting with the digital toolset – the Learning Toolbox (LTB).

The role of training campaigns in promoting e-maturity – the case of Bau-ABC

Initially the Learning Layers (LL) project was launched primarily as an ambitious co-design project – with a Europe-wide consortium and with multiple development agendas to be implemented in the pilot sectors Construction and Healthcare. The key impulses were given in the first Design Conference in Helsinki, in which also the idea of digitisation of training and learning materials of Bau-ABC was taken on board. However, in practice the co-design process turned out to be more complicated than expected (see below).

In the light of the above it was of vital importance for the Construction pilot that we started the Multimedia training activities in Bau-ABC at a relatively early phase – with a smaller number of pioneering trainers who volunteered to participate in training workshops that took place on Friday afternoons and Saturday mornings. In the first phase of these training sessions the participating trainers got an overview on the most important digital tools and enhanced their skills in producing and editing videos. For a short interim period they continued to engage themselves with digital media in Friday afternoon sessions. Then, at a crucial phase in the project work the trainers initiated a training scheme for the whole organisation – based on the idea of “Theme Rooms” to be visited in a series of workshops. This idea was put into practice at the end of the year 2015 as a joint effort of ITB researchers and the pioneering trainers. In the final phase of the project we knew that these training campaigns were of vital importance for the co-design process and for the pilot activities. Therefore, I produced already in 2016 a digital overview on the evolution of the training activities – using a moodle ‘course’ as the means of presenting the different phases and respective actions. Below I share the link to this moodle overview:

The “Theme Room” training in Bau-ABC Rostrup – from the origins to the implementation in 2015

(Please use the guest login to access the overview.)

Learning Toolbox – from digitisation of training materials to a flexible toolset with many applications

As has been mentioned above, the co-design process in the Construction pilot (and in particular in the Bau-ABC) started with the idea to digitise the training and learning materials – hitherto collected into the “White Folder”. However, after a rather short explorative phase, the process took a new course – to develop a digital toolset (that can be used with mobile devices) – the Learning Toolbox (LTB). Here, it is worthwhile to not that the explorative phase helped to put an emphasis on supporting workplace-based learning of the users. This process was carried out – parallel to the training campaigns – and completed with a viable product that the Bau-ABC trainers could use.  Primarily they presented working & learning tasks, share relevant knowledge resources and managed training-related communication. Parallel to this, the first applications were developed, in which LTB was used to support the coordination and management of construction work and related communication on a construction site.

Based on this founding phase, Bau-ABC has continued with its internal follow-up activities, whilst new challenges have come to picture in projects that extend the use of LTB to construction work in decentralised work organisations (and decentralised training and learning within continuing vocational training).

Moreover, a very different context for using LTB has been discovered in the conferences of former LL partners. In the Helsinki conference of the Association for Medical Education in Europe (AMEE) in 2017 the LTB was used to reshape the poster area and to shift the emphasis from paper posters to ePosters that were shaped with the LTB. In some other conferences in 2017 a different approach is introduced with a limited number of hybrid posters or hybrid presentations that are linked to LTB-stacks. In this way the use of LTB is spreading to other contexts.

For our present discussions in the TACCLE4-CPD project I have prepared a similar moodle-based overview on these developments. Below I share the link to this latter moodle overview:

Learning Toolbox (LTB) pilot and follow-up (2014 – …)

(Here again, please use the guest login to access the overview.)

—

I guess this is enough of the legacy we bring to the TACCLE4-CPD project from the predecessor project Learning Layers. In particular the latter overview shows that the Learning Toolbox (LTB) is not only viable but also transferable – in the original contexts and in new ones. Therefore, I have to keep my eyes open to see, what all we can learn from the transfer activities.

More blogs to come …

In December 2017 I wrote a blog on the kick-off meeting of the EU-funded TACCLE4-CPD project that took place in our institute ITB at the University of Bremen. In that blog I described the background of TACCLE projects and presented the achievements of the pioneering TACCLE1 and TACCLE2 projects. I also drew attention to the legacy of the recently completed EU-funded Learning Layers project (2012-2016) upon which our institute can draw in the present project. As we see it, the Learning Layers’ Construction pilot was in many respects a predecessor of the present project in the field of vocational education and training (VET). Now it is time to have a closer look at our context of work and make more specific plans for the forthcoming activities. I will start this with an updated description of the TACCLE4-CPD project that I prepared fro the ITB website and then move on with the stock-taking (with focus on the Learning Layers’ successor activities and with the project neighbourhood that I have found from our own institute).

TACCLE4-CPD in a nutshell: What is it about?

The ErasmusPlus project TACCLE4-CPD promotes strategies for integrating digital technologies into teaching/learning processes. From this perspective the project supports teacher trainers and organisations that develop teachers’ and trainers’ digital competences. The project builds upon the digital tools, web resources and training concepts that have been created in prior TACCLE projects or other predecessor activities. From the ITB point of view, this project provides an opportunity to work further with the Learning Toolbox (LTB), a key result from the Learning Layers project.

TACCLE4-CPD in a closer look: What is it trying to achieve?

The TACCLE4-CPD project is funded by the ErasmusPlus programme as a ‘strategic partnership’.  It promotes educational strategies for integrating digital technologies into teaching/learning processes in different educational sectors. From this perspective the project puts the emphasis on supporting teacher trainers and/or organisations that develop teachers’ and trainers’ digital competences. When doing so, the project builds upon the digital tools,  web resources and training concepts that have been created in earlier TACCLE projects and other predecessor projects.

Regarding the earlier TACCLE projects the current project can make use of the TACCLE Handbook (that will be updated), the TACCLE2 websites and the separate TACCLE courses. Regarding the Learning Layers project the current project can build upon the work with the Learning Toolbox (LTB) and on the Multimedia training schemes (that were organised with construction sector partners).

Whilst the previous TACCLE projects have been working directly with pioneering teachers, the TACCLE4-CPD project addresses now the training of trainers.  In the same way the emphasis is shifted from particular teaching/learning innovations to shaping models for continuing professional development. In this respect the partners promote community-development among professionals and organisations that support the delivery of digital competences and their integration into learning culture. Regarding ITB, it has a specific possibility to develop cooperation and synergy between ongoing European and German projects – in particular between TACCLE4-CPD and the parallel projects STRIDE and DMI.

—

I think this is enough of the starting points of the TACCLE4-CPD and how I interpret our task in the project. In my next blogs I will continue by looking more closely what we can bring into the project from the Learning Layers’ follow-up and from the neighbouring projects.

More blogs to come …

Last April (2017) I prepared for myself a ToDo list to prepare three conference papers with which I would revisit the experience of our EU-funded Learning Layers project (2012 – 2016) with emphasis on the achievements of the Construction pilot. I had the plan to participate in three conferences and I expected that I could prepare respectively three research papers that would examine from a conceptual point three important aspects of our project work

• the methodological issues on accompanying research (comparing our work with that of predecessors);
• the pedagogic foundations of our work (relating our starting points to current developments at policy level and in parallel pilots);
• the relevance of our work vis-à-vis industrial and organisational innovations (comparing our innovation agenda with its prior and emerging innovation concepts).

In October 2017 I wrote a blog in which I mentioned that intervening factors had slowed down my work. However, I was pleased to inform that I had managed to complete my ToDo list and produce three working papers to cover the themes that I had planned. Yet, after a short while I had to admit it to myself that I had celebrated my achievements too early. Indeed, I had covered the themes but the quality of the papers was uneven. In all papers I could see gaps that I had to cover. I had brought into picture essential elements of each ‘story’ but not all of the stories were woven together with a coherent argumentation. So, I understood that I have to rework all the papers from this perspective.  Now I have revisited the Learning Layers experience once again and completed the necessary reworking of these papers.

What do the (reworked) papers tell about our research in Learning Layers and on the growth of knowledge via our project?

Below I try to present the main contents of the newly reworked papers and highlight to red thread of the ‘story’ that is to followed through different sections. Here I want to draw attention on the conceptual and methodological foundations of our work in the Learning Layers as well as to the reflection on the predecessor concepts in the light of our work. Moreover, I will discuss some newer developments in innovation policies and innovation research as challenges for our approach.

Paper 1: Accompanying research between knowledge development and support for innovations in the field – Revisiting earlier innovation programmes as predecessors of the Learning Layers project

The first paper starts with the explanation, why the research team from our institute ITB declared itself as an  accompanying research (Begleitforschung) team in the Learning Layers’ Construction pilot. As a conceptual and methodological background for this approach the paper reconstructs the development of accompanying research in two parallel threads of innovation programmes in Germany:

• Innovation programmes for social shaping of work, technology and organisations (Humanisierung der Arbeit, Arbeit und Technik);
• Pilot projects and innovation programmes in the field of vocational education and training (Modellversuche, BLK-Programm “Neue Lernkonzepte in der dualen Berufsausbildung”).

Throughout these explorations the paper draws attention to different positions, whether the researchers should take a co-shaping role in innovation processes – and on shifts of emphasis in the course of time. Finally, the paper draws attention to specific positions that argue for more intensive and shaping-oriented involvement in terms of ‘action research’, smart innovation analyses and/or dialogical knowledge development. In the concluding reflections the paper compares the position of ITB researchers with the latter approaches.

Paper 2: Research as mediator between vocational learning, work process knowledge and conceptual innovation – on the role of research in the modernisation of vocational education and training (VET)

The second paper starts with recapitulating how the ITB researchers entered a participative co-design process with an open agenda and then supported the design idea – digitisation of training and learning processes in VET – with conceptual inputs. In the following sections the paper presents different conceptual reflections and insights into policy debates – to be followed by exemplary pilot projects that respond to the challenges raised in the debates. The relations between these sections can be characterised as follows:

• The contribution of Rauner (shaping-oriented VET) provides an interim synthesis of different concepts and themes that are essential for VET development. The empirical studies of Böhle (experiential knowledge) and Koch (mastery of complete work process) highlight the importance of their key concepts for advanced automation and future-oriented staff development.
• The contribution of Baethge et al. presents a negative scenario on renewability of VET and vocational learning culture during the transition to ‘knowledge society’. The contribution of Pfeiffer presents a critique of Baethge’s interpretation on ‘experiential knowledge’ and gives insights in complementary relations between academic and experiential knowledge in innovative organisations. The contribution of Spöttl deepens the analysis with his examination on to parallel educational genotypes (Bildungstypen) and on the relevance of hybrid types for the emerging innovation agenda ‘Industry 4.0’.
• In the light of the above-mentioned conceptual inputs and the debates on the sustainability of VET the selected pilot projects (and the example of Learning Layers) demonstrate, how shaping-oriented VET can be based on participative processes of practitioners. The exemplary cases demonstrated, how pilot projects have mobilised the participants in creating their own innovation agendas and implementation plans – and shaping the digital tools and web resources they need for themselves. Even, if these may have been modest starts, they have provided a basis for peer learning and peer tutoring – as social dynamics for innovation transfer.

Paper 3: Accompanying research as bridge-builder between digitisation and social shaping in workplace learning – Linking ‘work process knowledge’ and ‘smart innovations’ to ‘Industry 4.0’

The third paper examines the innovation agenda of the Learning Layers’ Construction pilot vis-à-vis industrial and organisational innovation research that takes into account the role of VET. In this context the following milestones and transitions are discussed:

• The starting point is the re-examination of the legacy of the European Work Process Knowledge network of the late 1990s. The paper gives a brief overview on the studies, the debates and the conclusions on the importance of VET.
• The next milestone is the re-examination of the German project “Smarte Innovation” that was completed in 2012. This project developed a more intensively participative approach to analyses of product life cycles and innovation potentials at different stations. The project also presented critical analyses of communication gaps, lack of understanding on innovation potentials in ‘remote’ stations and on the dysfunctional role of externally imposed process standards. Concerning the role of VET, the project drew attention to an emerging model for continuing vocational training (CVT) that outlined a new career progression model.
• The following milestone is the analysis of successive innovation programmes and the shift of emphasis from ‘remedial interventions’ (that compensate the negative consequences of mainstream innovations) to ‘enabling innovations’ (that seek to facilitate the development of ‘learning organisations’ into innovation leaders). As a contrast to the above-mentioned ones, the emerging innovation agenda ‘Industry 4.0’ shifts the emphasis to advanced automation, complex networking and new digitised production and service chains.
• The final milestone is the examination of the current discussion of social and educational scientists on the role of human actors in the context of ‘Industry 4.0’. Here, a number of researchers have brought together different conceptual and empirical studies that emphasise the potential of skilled workers and on the possibility to shape learning opportunities when developing new production or service concepts. Parallel to this, some researchers explore the possibilities to develop off-the-job learning opportunities as means to enhance workplace learning alongside the new production concepts.

– – –

I think this is enough of the contents papers and of the ‘stories’ that weave them together. As I see it, the Learning Layers’ Construction pilot may not have been at the forefront of industrial and organisational innovations or in the introduction of digital agendas to the field of VET. Yet, it has been clearly part of the big picture on all accounts and it has done its part to stimulate essential innovations in the field of VET. However, this leads us to another question: What can we say about transfer of innovations in the light of the Learning Layers project and its follow-up activities? To me, this is a subject to further studies to be reported later.

More blogs to come …

In my two previous blogs I have been developing a series of  posts that reflects on the Final Review of our EU-funded Learning Layers project (one year ago) and on the achievements of the follow-up activities. My first post focused on the review event and on the blogs with which I have documented the event and the follow during the year 2017. In my second post I summarised the current phase of the follow-up projects – in particular on further uses of the Learning Toolbox (the main result of Learning Layers’ Construction pilot). This reporting was based on a series of working meetings and conversations that we had last week with different partners. In the second post I discussed follow-up projects and initiatives with several partners involved. In addition, I brought forward the use of Learning Toolbox as support for conference presentations and posters (see the showcases) also in our field. In this third and concluding poster I will focus on the use of Learning Toolbox (LTB) in the training activities and related initiatives of the training centre Bau-ABC Rostrup. (As I have reported in my blogs in the years 2012-2017, Bau-ABC was the major application partner in the Learning Layers’ Construction pilot and the central venue for developing and testing the Learning Toolbox.) My report below is based on the information that Bau-ABC trainers shared with us in the working meeting last week.

Use of Learning Toolbox in the regular apprentice training activities

In the context of the Learning Layers project the LTB was developed to be used in the context of apprentices’ projects (normally of one week’s duration) during their stay in the training centre Bau-ABC. At that time the LTB was introduced and tested in a few training occupations (and the results were discussed in evaluation workshops and in interviews with the trainers). Now we were interested to find out, how the Learning Toolbox is being used after the project period.

Lothar Schoka, trainer for the occupations in well-building and borehole building (Brunnenbau, Spezialtiefbau) informed us on the use LTB in his area. It appeared that the use of LTB had become everyday practice in their projects. The information is available in the trade-specific stack, the apprentices get quickly used to working with the toolset and they can combine the work with their mobile devices and work in the computer class. Thus, the use of LTB is a sustainable outcome of the Learning Layers project.

Use of Learning Toolbox for the transversal theme ‘health and safety’

Another arena for working with the LTB has been the transversal theme ‘health and safety’ (Arbeitssicherheit und Gesundheitsschutz). In Spring 2017 a working group of Bau-ABC trainers started to discuss the possibility to use digital tools to support training and learning in this field. At that time I had a chance to accompany and support the start of the working group. After the summer holidays the working group continued with regular meetings and concentrated on using the LTB. Now, trainer Thomas Weerts (the shop steward for health and safety in Bau-ABC) reported on the current phase of the work. The trainers involved in the work had agreed on common content structures for ‘health and safety’ to be covered in their trade-specific stacks for LTB. Thomas himself is developing the ‘mother stack’ for the theme ‘health and safety’ that guides the users to groups of trades and to specific trades. (This ‘mother stack’ will also provide a template for the trades that are still developing their own stacks.)

Use of Learning Toolbox in the project “Workcamp GreenHouse”

A further arena for using the LTB was presented by the trainer Markus Pape (responsible for training carpenters). He is currently working in a nation-wide project “workcamp GreenHouse” that has been launched by several training centres in the construction sector. The project is building exhibition areas and items to demonstrate ecological/sustainable solutions in building houses (with emphasis on energy-efficiency, ecological isolation materials etc.). Altogether, the project is shaping a wide range of modules to introduce these principles in the training for construction sector. In the meeting he presented an overview on the modules and explained, what modules would be suitable for piloting with the LTB. For this purpose he invited the LTB developers to prepare a proposal to be introduced to the project consortium.

Use of Learning Toolbox to support language learning alongside apprentice training

A further arena for working with the LTB is the support for language learning for non-native speakers alongside apprentice training. During the Learning Layers project this area was already explored in a workshop with several Spanish apprentices who were having their training in Bau-ABC. In the meantime a separate working group in Bau-ABC had been developing this idea further. Melanie Campbell (as a coordinator of the related Mobipro-EU project) presented a plan for shaping the LTB stacks that support general orientation (blue tiles), trade-specific vocabulary (green tiles) and communication skills (red tiles). We discussed this plan together with her, the trainers and a supporting language teacher. The developers of Learning Toolbox came up with proposals, how to introduce elements of gamification and motivational support for learners.

– – –

I guess this is enough for an overview. To me this was an important update since I am trying to link cooperation with these initiatives to my participation in our new EU-funded project (TACCLE4 – CPD). In this project we are supporting the training of teachers and trainers in using digital tools and in shaping digital contents for learners. As I see it, the LTB can play a major role in promoting these activities in the field of vocational education and training (VET). But, to be sure, I need to explore this prospect deeper and have more meetings with Bau-ABC trainers.

More blogs to come …

With my latest blog I started a series of blog posts that reflects on the final review of the EU-funded Learning Layers project (exactly one year ago) and on our progress with follow-up initiatives. The first post looked back at the review event and at the blogs that I had written on the event and on the follow-up activities. At the least it gave a picture of a ‘milky way’ of posts reporting on meetings with different partners – either within ongoing projects or as preparation of new initiatives.

Last week we (the ITB team) had a series of meetings with the developers of the Learning Toolbox and with interested partners in the construction sector in North Germany. In the following I will give a brief summary on the ongoing projects and emerging initiatives that build upon our work with the Learning Toolbox in the Learning Layers project. (For more information on the Learning Toolbox see the website.)

The DigiProB project – Learning Toolbox supports continuing vocational training (CVT) of Bau-ABC

As has been reported in my blogs of the year 2017, the German-funded project DigiProB has started already during the last months of the Learning Layers project. The aim of the project is to develop and introduce digital tools that support training and learning in the continuing vocational training (CVT) schemes in the construction sector. In particular the project focuses on the CVT programmes that upgrade skilled workers to foremen (Vorarbeiter), to specialised construction site managers (Werkpolier) and general construction site managers (Geprüfte Polier). The project had a twofold aim:

• to support the integration of training contents into integrated projects and
• to provide the participants digital tools that support their self-organised learning between course periods.

In the year 2017 major progress was achieved with a working group of part-time trainers (lecturers) responsible of different subject areas. A development website was launched to shape a set of integrated projects and for uploading relevant content. In addition, a working agreement was reached, how to integrate this development website to the course management system of Bau-ABC and how to make the digital content available for the learners. In this arrangement it was agreed that the Learning Toolbox will be used as the learners’ tool (and interface with the learning content). In the meeting last week several points were discussed on the finalisation of the software architecture to be used in the pilot activities in the coming weeks.

The ‘Social competences’ initiative – bringing the Learning Toolbox to construction companies

Another follow-up initiative that was started after the final review was the company-specific pilot with the construction company H. This company is a medium-sized enterprise that has specialised in pipeline-building and installations (water and electricity).  The company has several regional offices and its construction teams are working in a wide area in North Germany. The starting point of the cooperation was a feasibility study that was prepared by the developers of the Learning Toolbox (with support from the ITB team). This study made recommendations for the improvement of the system solutions and the software architecture of the company – to improve the sharing of information between the offices and the construction teams. Already in this context the Learning Toolbox played a role. As a spin-off from this study, the partners prepared also a project initiative to use Learning Toolbox as means to improve the communication and knowledge sharing between apprentices and in-company trainers. The pre-proposal had been accepted by the funding body and the partners were invited to submit a detailed proposal for a project that is due to start in Spring 2018. This proposal was discussed last week in the meeting between the partners involved in the project.

From ‘BIM-Table’ to ‘BIM-Koffer’ – preparing hardware solutions for mobile construction teams

One of the pain points for promoting the use of digital tools in construction work was the lack of appropriate hardware that is robust enough and well-protected from bad weather conditions, but at the same time provides access to relevant apps and software. On larger construction sites the companies have tried to introduce ‘BIM-Kiosks’ or ‘BIM-tables’, mainly to support the work of construction site managers and/or supervising engineers. This idea was picked by several Learning Layers partners (including CIMNE, ITB and some craft trade companies) but with the emphasis on similar needs of SMEs, smaller construction sites and mobile teams of construction companies. The construction sector partners have strongly underlined the need for a ‘mobile office hardware set’ (BIM-Koffer) that could provide a WLAN for the construction site and link to internet from remote locations. Whilst the design of such a hardware solution hasn’t fallen into the scope of funding programmes, a pilot team has come up with a plan to prepare a prototype that can be used in small-scale pilots and eventually in funded projects. In this initiative both the access to BIM software and to Learning Toolbox play a role.

Bringing Learning Toolbox into conferences – also in the field of vocational education and training (VET)

One of the delightful news of the year 2017 was the broad-based and successful use of Learning Toolbox as a conference tool to create ePosters (and mini-posters for poster-walls) in the AMEE 2017 conference. This pioneering exercise has been well documented by the introductory videos and by the showcases on the Learning Toolbox site. Based on this success story, another way of using Learning Toolbox with ‘hybrid posters’ was tested in the EC-TEL 2017 conference.

Now, when preparing the 2018 conferences, the ITB team has initiated contacts between the Learning Toolbox developers and organisers of conferences in the field of educational research (or research in vocational education and training (VET)). Even if we may not be able to make major steps forward this year, we are in a good position to start preparations for similar pilots as in the above mentioned conferences

– – –

I guess this is enough updating on the projects and project-like initiatives that involve several partners. On top of this we learned a lot of further work with the Learning Toolbox within the training centre Bau-ABC Rostrup. But that is already a topic for a further blog post.

More blogs to come …

One year ago we had the pleasure to organise the final review of our EU-funded Learning Layers (LL) project (2012-2016) here in North Germany. The main argument to locate the meeting ‘in the field’ was that in this way the consortium and the reviewers could get a better impression on the impact of our work on the application partner organisations and their work. Therefore, we had most parts of the review meeting in Verden at the premises of Norddeutsche Zentrum für Nachhaltiges Bauen (NZNB). This centre for ecological construction work had worked as an application partner in the construction pilot of the LL project. Also, in the premises of the NZNB the participants could see the permanent exhibition and attend live demonstrations on working with ecological materials in construction work. The idea, to bring the review to such a location was received well. Also, trainers from the construction industries’ training centre Bau-ABC Rostrup could participate and give their contributions on the impact of the project on their work. The pictures below give an impression on the environment and on our tour round the premises.

What we (the LL Construction pilot) presented in the review meeting

After the event I wrote several blogs focusing firstly on the preparations and event itself, secondly on our report on the Construction pilot in which our ITB team had played a major role and thirdly on the conclusions from both pilot sectors of the LL project (Construction and Healthcare). At this moment I do not want to repeat what we said and what I wrote at that time. Here you have the links to the blogs of last year:

Final Review of Learning Layers – Part One: The Event and the Arrangements

Final Review of Learning Layers – Part Two: Presentations on the Construction Pilot

Final Review of Learning Layers – Part Three: Comparisons between and reflections on the pilot sectors

Altogether, we – reporting from the sectoral pilots – gave a picture of pilot teams working intensively with the application partners in the pilot organisations (in particular with the training centre Bau-ABC and the network for ecological construction work). The development of the digital tools and the mobile learning technologies was driven as a participative process in which the technical partners adjusted their ideas to the contexts and users’ potentials. These messages were summarised in two further blogs that I wrote shortly afterwards – to support the final edition of our final ‘final report’ that we were required to submit in addition to the final reporting on the website “Learning Layers Results“.

The Legacy of “Learning Layers” Construction Pilot – Part One: The project experience in a nutshell

The Legacy of “Learning Layers” Construction Pilot – Part Two: Impact of project activities in Bau-ABC Rostrup

In this way we managed to reach a phase in which the Learning Toolbox was a usable tool in different contexts of the construction pilot – and its potentials had been discovered in other application contexts.

What has happened with the follow-up activities after the Final Review

By the time of the review meeting we had already reached the phase of preparing and launching follow-up activities. For us – the research team in ITB and the developers of the Learning Toolbox – it was clear that we have to work together with application partners in the construction sector. The introduction of the Learning Toolbox had been started, but it was not a self-mover. Participative design, training interventions, accompanying research and knowledge sharing was needed – both between ‘old’ partners and ‘new’ users. Therefore, we started working with several parallel follow-up initiatives that started to take shape gradually. This process can be reconstructed with the help of my blogs that I have written in the year 2017 on different follow-up events:

What comes after “Learning Layers”? – Part One: The follow-up activities are taking shape

What comes after “Learning Layers”? – Part Two: Bau-ABC trainers working with digital media and ‘health and safety’

What comes after “Learning Layers”? – Part Three: Getting deeper with vocational learning, ‘health and safety’ and digital media

What comes after “Learning Layers”? – Part Four: Further steps with Bau-ABC trainers and ‘health and safety’

Introducing Learning Layers tools to construction companies – Insights and working issues

Shaping digital tools for continuing vocational training in construction sector – the DigiProB workshop in May

Working further with the Learning Toolbox – Overview on current activities in construction sector

These were the blogs that I wrote before the summer holiday break. After the summer holidays my work situation changed slightly and I didn’t have a similar possibility to accompany parallel activities. Yet, I could make some notes on the further progress with the activities in North Germany and on the use of Learning Toolbox in conferences.

Working further with the Learning Toolbox (LTB) – Part One: Notes on meetings with application partners

Working further with the Learning Toolbox (LTB) – Part Two: LTB-based ePosters become success stories in European conferences

So, as we can see from the long list of blogs, there was all the time something going on. And indeed, the Learning Toolbox was being developed for further contexts and users. Moreover, we – as accompanying researchers – felt the need to work with these initiatives. In particular, we wanted to learn, how the introduction of digital tools into work-related or organisational learning opens new frontiers to be explored. But this is already a topic for a further post.

More blogs to come …

At the end of April this year I had left behind all the work after the final review of our EU-funded Learning Layers (LL) project. We had completed the work for the review and the additional tasks that were required to clarify the picture. At that time I was looking forward to revisit the project experience and wrote myself a “ToDo List” – outlining a set of working papers that I wanted to complete as soon as possible. This is what I wrote as my opening statement:

“Now, we have a chance to revisit the project experience and draw conceptual and methodological conclusions of our work in the Construction pilot. And I have booked myself in to three conferences to have a closer look at our achievements and how review them from a conceptual point of view.”

Little did I know at that time, what kind of intervening factors may cause delays to such plans. Instead of working three papers ready by the middle of August I had to take a break and give thoughts on something bigger than my work. Yet, having taken the time I needed, I am happy to announce that I have completed the ToDo List of late April. Today I have uploaded the last one of the designed three Working Papers on my account on ResearchGate. And in order to put the three Working Papers into a group picture, I published the following update:

“During the year 2017 I have written three parallel working papers that are the pillars for my re-examination of our work in the Learning Layers project and its Construction pilot. Together they provide insights into our methodological orientation and to two central theoretical themes in the context of a participative research & development project:

In my previous post I gave a progress report on our work with the Learning Toolbox (LTB) in the follow-up activities of our EU-funded Learning Layers project and its Construction pilot (2012 -2016). With this post I want to give visibility for the successful implementation of LTB as a tool for creating ePosters for large (European and international) conferences. This work has been led by the coordinator of the Learning Layers’ healthcare pilot, Tamsin Treasure-Jones and by the key developer of LTB, Raymond Elferink. Together with their support team they have pioneered with the use of LTB-based ePosters in the AMEE 2017 conference in Helsinki. I am pleased to publish their report on my blog. Many thanks to Tamsin, Ray and their team! From this point on I am using their text (slightly edited) and their pictures & links:

“Learning Toolbox – a transformative ePoster solution: AMEE 2017 as an example

Learning Toolbox as an ePoster solution is a spin-off initiative that emerged from the EU- funded Learning Layers research & development project. AMEE 2017 has been the pioneering ePoster client. AMEE is the very large (approx. 3,800 delegates) annual international conference of the Association of Medical Education (AMEE).

Overview of Learning Toolbox as the ePoster solution at AMEE 2017

These two short videos (which were created for the conference participants) provide an overview of the how the ePosters worked at AMEE.

https://youtu.be/6KUFHBhZGVs                https://youtu.be/QKQ5R1mZzlw

In total we supported 80 ePosters (this included 3 which we created with the authors during the conference itself, as they had lost their paper posters in transit!). You can explore and interact with all the ePosters on our AMEE 2017 ePosters Showcase page https://my.ltb.io/#/showcase/amee:

What is novel about Learning Toolbox?

Underlying our approach are several educational aims to transform the way in which posters (and existing ePoster solutions) are used in conferences:

Moving beyond PDFs

We wanted to move beyond a vision of ePosters as just an onscreen version of a paper poster (most ePoster solutions are effectively online PDFs with minimal interactivity). Learning Toolbox allows people to include a wide range of multimedia and interactive material in their ePoster including videos, surveys, presentations, web links and even apps.

Bridging between the physical and virtual worlds

We wanted to give the ePosters both a physical and virtual presence at the conference, and to allow easy bridging between these worlds. Existing ePoster platforms often only offer the ePosters online, so that they are easily overlooked in busy conferences. We used the mini-poster wall to actually give the ePosters a high profile (but small footprint) presence in the conference and a very easy way to move from the mini-poster to the ePosters.

Direct engagement & interaction between people

We wanted to support people engaging with the ePoster work and the ePoster authors (with traditional posters & ePosters this interaction with the author is only really possible during a very short timetabled presentation session). So Learning Toolbox also allows people to have discussions that are attached to the ePoster (viewable by all who interact with that ePoster) and the ePoster author can also send out messages to the ePoster. These exchanges can happen before, during & after the conference. Our educational aim is for this extra interactivity to help people to find and develop groups who have a shared interest in their research topic. This can be a particular issue at large conferences such as AMEE.

Bring your own device – ePosters in your pocket

We wanted to help people to feel very connected to the ePosters, to have them in their hands, in their pocket. You can also easily share an ePoster from one phone to another, allowing people to pass on the ePosters that interest them. Many traditional ePoster solutions rely heavily on expensive hardware (large screens or touchscreens). Learning Toolbox instead uses people’s own devices, supporting a more personalised experience.

Life beyond the conference

We wanted people to be able to take home the ePoster, to actually have them as a long-term learning resource that could be used by the ePoster author and those who had an interest in their topic. Learning Toolbox allows conference attendees to favourite and easily take home ePosters with them on their phone and it allows the ePoster author to add to and update their ePoster following the discussions at the conference”

– – –

This was the report of our pioneering team in AMEE 2017. If you want to have more information on the way the participants prepared themselves for the conference and how the ePosters were used, I would recommend you to follow the tweets of Tamsin Treasure-Jones @tamsinttj. And if you want to get more information, how to use ePosters in your conferences, contact Raymond Elferink and his team support [at] stack [dot] services

As I have heard it from Gilbert Peffer, who was also involved in that exercise, also other conferences and support organisations are interested to use ePosters. We hope that also our conference organisers in the field of Vocational Education and Training (VET) research will follow their example in due time.

More blogs to come …